Track abuse, street abuse, or just flat-out abuse, this torque arm is designed to handle it all! Eliminate unwanted traction problems by adding a UMI Performance tunnel brace mounted torque arm. This aftermarket torque arm replaces the flimsy factory torque arm while adding strength, rigidity and eliminating suspension flex. UMI’s torque arm design relocates the front torque arm mounting point off the transmission tail shaft protecting the transmission and preventing transmission damage. A shorter torque arm improves weight transfer on acceleration. General Motors tail shaft mounted design works great for a stock driven vehicle however it was not designed to take the abuse of a drag car. UMI’s tunnel mounted torque arm bolts to existing floor pan holes using 3/16” thick mild steel laser cut mounting plates and metric grade 10.9 hardware. The torque arm attaches to the supplied cross brace using polyurethane bushings on both the supplied cross brace and torque arm to help absorb noise. The torque arm rear mount is 3/8” thick CNC machined mounting plates and are appropriately drilled to fit the stock rear ends as well as aftermarket 12-Bolt’s, 9” Rear-end housings and Strange S60.
Exhaust clearance: P/N 2203 is designed with a drop down front cross member and built in drive shaft loop to clear virtually all aftermarket header/y-pipe set-ups on the market. It will also clear most merge collectors such as QTP and TSP y-pipes. The built in drive shaft loop will not clear factory y-pipe and y-pipes that bolt to the factory manifolds on 1998-2002 models. P/N 2203 does reduce ground clearance, if vehicle has a tighter fitting y-pipe set up please see P/N 2201.
Rear Mounting Plates machined from 3/8” thick mild steel for strength and designed to fit stock rear end as well as 12- Bolt, S60 and 9” housings.
Removes torque arm from transmission tail shaft protecting transmission from damage.
UMI Performance 93-02 GM F-Body Tunnel Mounted Trq. Arm- LT Headers w/ Loop - Red
2203 - 1993-2002 GM F-Body Tunnel Brace Mounted Torque Arm - Long Tube Header
Torque arm attaches to mount using solid ¾” rod eyes and grade 8 hardware
Greaseable polyurethane bushings designed to keep road noise at a minimum.
Pinion changes made using 4140 CrMo heat treated adjuster, built in house.
Bolt-on design requires no welding or drilling during installation.
Fabricated from 1.250” x 0.120” DOM seamless steel tubing.
CNC laser cut mounting plates to ensure hole to hole accuracy
Crossmember uses 0.120” x 2.000” rectangular tubing.
Allows for easy on the car pinion angle adjustments.
TIG welded 4140 CrMo tube adaptors, built in house.
Eliminates wheel hop and solves traction problems.
Pivot brackets allow instant center adjustment.
Reduces front end nose dive during braking.
Durable gloss powder coat finish.
Torque Arm Benefits:
Build Features:
Torque Arm
