ICON’s billet aluminum rear lower link arms for the 2020-2023 Jeep Gladiator and 2019-2026 Ram 1500 are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. These links are made from CNC machined 6061 aluminum in-house and anodized for corrosion resistance, providing a major improvement over the construction of the stock units. This rear lower link arm kit features PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and on-vehicle link arm length adjustability using ICON’s double adjuster system. Additionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and/or other maintenance. The quality rod ends and bushings featured in these link arms allow the vehicle’s suspension to function as intended, without the bushing bind that limits the vehicle in stock form. ICON’s engineering team has also gone a step further in the development of these products by incorporating features such replaceable nylon rock sliders to prevent any hang-ups on the trail. After the design phase was completed ICON engineers put these parts through the “ICON1K” real-world test cycle for a final stamp of approval.
ICON’s billet aluminum rear lower link arms for the 2020-UP Jeep Gladiator are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. These links are made from CNC machined 6061 aluminum in-house and anodized for corrosion resistance, providing a major improvement over the construction of the stock units. This rear lower link arm kit features PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and on-vehicle link arm length adjustability using ICON’s double adjuster system. Additionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and/or other maintenance. The quality rod ends and bushings featured in these link arms allow the vehicle’s suspension to function as intended, without the bushing bind that limits the vehicle in stock form. ICON’s engineering team has also gone a step further in the development of these products by incorporating features such replaceable nylon rock sliders to prevent any hang-ups on the trail. After the design phase was completed ICON engineers put these parts through the “ICON1K” real-world test cycle for a final stamp of approval.
ICON’s billet aluminum rear lower link arms for the 2020-2023 Jeep Gladiator and 2019-2026 Ram 1500 are a significant upgrade over the factory units due to increases in strength, adjustability, and performance.
APPLICATION NOTE #660: Compatible with 0-2" of rear lift on most Jeep Gladiator submodels
APPLICATION NOTE #657: Compatible with 0-2.5" of rear lift on 2019-2026 Ram 1500 Rebel
Replaceable Nylon Rock Slider protects link and helps prevent hang ups while wheeling
APPLICATION NOTE #661: Compatible with 0-3" of rear lift on most Ram 1500 submodels
Adjustable while installed on vehicle for various lift heights & driveline angles
Multi durometer bushing for noise free operation and maximum angularity
APPLICATION NOTE #131: Will not fit 2019-2024 Ram 1500 Classic models
20-23 JEEP JT/19-26 RAM 1500 BILLET REAR ADJUSTABLE LOWER LINK KIT
APPLICATION NOTE #105: Not for vehicles with rear factory air ride
APPLICATION NOTE #184: Will not fit Ram 1500 TRX or Ram 1500 RHO
2020-UP JEEP GLADIATOR JT BILLET REAR ADJUSTABLE LOWER LINK KIT
ICON 2020+ Jeep Gladiator JT Billet Rear Lower Adj Link Kit
20-UP JT BILLET REAR ADJUSTABLE LOWER LINK KIT
ICON1K tested in extreme off-road conditions
CNC machined 6061 aluminum construction
No grease required for life of bushings
Quality JM16T PTFE-lined FK Rod Ends
Covered by ICON's lifetime warranty
Suspension Control Arm Kit
JT BILLET LOWER LINK KIT
BILLET LOWER LINKS
22063
