Camburg UCA Replacement OE X-Joint (Pair)

Rounding out 2020, we developed the new Camburg X-Joint. It’s an eXtreme performance, all-weather, all conditions, high angle ball-joint for our Camburg BJ performance upper control arms. These are much higher quality, considerably stronger and have an improved boot design that allows for higher angle use, better greasing and increased longevity. With higher strength heat-treated materials and an improved design, we were able to vastly improve upon what was available on the market. These are fully sealed and perfect for extreme conditions, so dirt, sand, rain, mud and snow are no match for them. The dual lip seal design on the boot insures the outside elements don’t make their way in and contaminate the grease and joint. The grease zerk fitting allows you to grease them on the truck without having to remove the boot. Our Camburg X-Joint is designed specifically for our ball-joint upper arms for optimum fit and maximum wheel travel. They do not retro-fit into uniball arms and are not designed for the stock sheet metal arms. We sell them individually or discounted as a set. These fit CAM-310079 and CAM-310083 upper control arms and interchange with the Moog BJ used prior. We recommend greasing the X-Joints 2-3 times per year or every 5-8k miles depending on use with a high temp. lithium complex #2 synthetic grease. Higher frequency lubing may be required when used off-road and/or in wet/snow/mud conditions.

Camburg Toyota Tundra 07-21 | 4-Runner 03-23 | FJ 07-14 UCA Replacement X-Joint - PAIR

Camburg 07-21 Toyota Tundra / 03-24 Toyota 4Runner UCA Replacement OE X-Joint (Pair)

Need further assistance? Call 1-714-848-8880.

Upper Control Arm REPLACEMENT OE X-JOINT (PAIR)

Camburg UCA Replacement OE X-Joint (Pair)

Suspension Ball Joint Kit

High angle design

Maximum strength

Camburg X-Joint

Fully sealed

X-Joint