CAM-010046 - 1.00" Uniball Replacement Kit

This kit is what's required to rebuild the uniballs in your Camburg upper arms, spindles and lower arm inner pivots. The kit includes two FK 1.00" uniballs and two snap rings. These are made in the USA and are not some cheap imported parts. For optimum strength they are heat-treated and have a self-lubricating military grade PTFE liner internally for reduced stiction and noise. Having a 90,000 lbs. load rating, these are far stronger than OEM style ball-joints and cheaper or smaller uniball bearings. The bearing ID with the mis-alignment spacers removed is 1.00" and the bearing OD is 2.125".Refer to our instructions for step-by-step directions.

Need further assistance? Call 1-714-848-8880.

Camburg 1.00 Uniball Replacement Kit (Pair)

CAM-010046 - 1.00" Uniball Replacement Kit

Camburg 1.00" Uniball Replacement Kit

1.00" Uniball Replacement Kit

Camburg Replacement Uniball

100,730 lb. load rating

Suspension Uniball Kit

Replacement Uniball

Stronger than OEM

Made in the USA

SuspUniKit