ICON Omega Series Bypass shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in length but allow the user to customize the ride characteristics to their liking through adjustment of the bypass valves. Like all ICON shock absorbers, Omega Series shocks are 100% rebuildable and 100% revalveable. ICON’s use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal “Bump Zone” that when used, creates a significant increase in damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. The ICON Bypass Valve is an externally adjustable valve that restricts oil flow through the bypass tube and provides 28 settings of compression and rebound adjustment with no tools required.
ICON VS 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. They feature remote reservoirs, damping adjustability, and are 100% rebuildable/revalveable.
ICON's Bypass Valve technology allows adjustment of compression and rebound damping with high resolution across the entire adjustment range
APPLICATION NOTE #250: Also requires ICON S2 Secondary Shock Hoop Kit and applicable LCA Skid Plate Kit or ICON LCA Kit to complete system
One piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
Recommended Aftermarket Tires: 33" x 11.50" (Larger tires may fit but fender trimming and modifications will be required.)
Internal “Bump Zone” increases damping force to provide more control as the shock approaches full compression
Hand adjustable bypass valves with 28 detented settings at quarter turn increments for precise suspension tuning
APPLICATION NOTE #55: Shocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle.
APPLICATION NOTE #251: May not be compatible with other manufacturer's secondary shock hoops or LCA kits
One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use
Recommended Aftermarket Wheels: ICON Alloys - 17x8.5 with 4.75” Backspace / 0mm Offset
Recommended Aftermarket Wheels: ICON Alloys - 18x9 with 5.00” Backspace / 0mm Offset
Recommended Aftermarket Wheels: ICON Alloys - 20x9 with 5.00” Backspace / 0mm Offset
PTFE lined spherical bearings and application specific mounting hardware
APPLICATION NOTE #185: Will not fit 2WD Tacoma with 5 wheel lug studs
7/8” diameter induction hardened, chrome plated shock shaft
APPLICATION NOTE #84: Does not fit KDSS equipped vehicles
S2 FRONT SECONDARY 2.5 OMEGA REMOTE RESERVOIR SHOCK PAIR
6061 aircraft grade aluminum CNC machined components
TECH NOTE: Not compatible with KDSS equipped GX470s
Bypass tubes are replaceable in the event of damage
ICON S2 Front 2.5 Omega Series Shocks RR - Pair
S2 SECONDARY FRONT 2.5 OMEGA RR PAIR
TOYOTA S2 FRONT 2.5 OMEGA RR PAIR
OEM Wheels & Tires Fitment: Yes
Suspension Shock Absorber Set
S2 FRONT 2.5 OMEGA RR PAIR
S2 OMEGA SECONDARY
100% Revalveable
SECONDARY SHOCKS
100% Rebuildable
59906P
