ICON 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON'S Shock Absorbers, 2.5 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. If you are looking for a more user defined tune, consider looking into the ICON CDC Valve shocks.
ICON V.S. 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. They feature remote reservoirs and are 100% rebuildable/revalveable.
TECH NOTE: Can be installed with ICON Dual Shock Mount kit part number 39010. A quantity of 2 are required per vehicle and heim spacers part number 257164 (qty 8) are also required.
All ICON 2.5 Series Piggyback and Remote Reservoir shocks can be upgraded to ICON’s Compression Damping Control Valve (CDCV)
One piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use
ICON 99-04 Ford F-250/F-350 Super Duty 4WD 3-6in Front 2.5 Series Shocks VS PB - Pair
1999-2004 FORD SUPER DUTY 4WD 3-6" LIFT FRONT 2.5 VS PIGGYBACK SHOCK PAIR
PTFE lined spherical bearings and application specific mounting hardware
7/8” diameter induction hardened, chrome plated shock shaft
TECH NOTE: Compatible with 3-6” of front lift over stock
Nitrogen charged monotube design with piggyback reservoir
6061 aircraft grade aluminum CNC machined components
99-04 FSD 4WD 3-6" FRONT 2.5 VS PB PAIR
99-04 FSD 4WD 3-6" FRONT 2.5 PB
Suspension Shock Absorber Set
SHOCK ABSORBER PAIR
100% Rebuildable
100% Revalveable
FSD REAR SHOCKS
37710P
