ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON'S Shock Absorbers, V.S. 2.5 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. The ICON CDC Valve is an externally adjustable valve that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges.
APPLICATION NOTE #71: ANY KIT WITH PART #57802P/CP IN IT WITH STOCK REAR COIL SPRINGS VEHICLE WILL RIDE IN BUMP ZONE OF SHOCK. STOCK OR SOME AFTERMARKET COIL SPRINGS MAY COME UNSEATED AT FULL DROOP.
One piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
ICON's CDC Valve technology allows for 10 levels of high-resolution compression adjustability with the turn of a knob
One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
TECH NOTE: Not compatible with 100 Series Toyota Land Cruiser equipped with rear air suspension (AHC)
Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
1991-2007 LAND CRUISER 80/100 SERIES 0-3" LIFT REAR 2.5 VS REMOTE RESERVOIR CDCV SHOCK PAIR
Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use
ICON 91-07 Toyota Land Cruiser 80/100 0-3in Rear 2.5 Series Shocks VS RR CDCV - Pair
PTFE lined spherical bearings and application specific mounting hardware
7/8” diameter induction hardened, chrome plated shock shaft
Nitrogen charged monotube design with piggyback reservoir
91-07 LAND CRUISER 80/100 0-3" REAR 2.5 VS RR CDCV PAIR
6061 aircraft grade aluminum CNC machined components
91-07 LC 80/100 0-3 REAR 2.5 VS RR CDCV
Suspension Shock Absorber Set
REAR SHOCK ABSORBERS
100% Revalveable
100% Rebuildable
