Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain. CDEV’s hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly.
ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks with CDEV are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. Like all ICON'S Shock Absorbers, V.S. 2.5 Aluminum Series shocks with CDEV are 100% rebuildable and 100% revalveable.
ICON 2.5 Aluminum Series shocks with CDEV are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured for each application in both length and damping tune.
ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)
TECH NOTE: Only compatible with models equipped with 3.6L V6 gasoline engine. Not compatible with Wranglers equipped with 3.6L V6 eTorque engine.
One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
One-piece, hard anodized, impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
TECH NOTE: Also requires installation of IIC kit (Part # 23502) and CDEV rear shocks (Part # 27726EP or 27727EP)
2018-UP JEEP WRANGLER JL/GLADIATOR JT 2.5" LIFT FRONT 2.5 VS REMOTE RESERVOIR CDEV SHOCK PAIR
Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use
TECH NOTE: Gladiator Mojave trim requires 14mm misalignment spacer kit, part # 611070.
TECH NOTE: An iOS operated device is required to run ICON Intelligent Control App
TECH NOTE: Only fits models equipped with 3.6L "Pentastar" V6 gasoline engine.
ICON 2020+ Jeep Gladiator JT 2.5in Front 2.5 Series Shocks VS RR CDEV - Pair
PTFE lined spherical bearings and application specific mounting hardware
7/8” diameter induction hardened, chrome plated shock shaft
Nitrogen charged monotube design with piggyback reservoir
6061 aircraft grade aluminum CNC machined components
20-UP JT/18-UP JL 2.5" FRONT 2.5 VS RR CDEV PAIR
20-23 JT/18-23 JL 2.5" FRONT 2.5 VS RR CDEV PAIR
JL/JT 2.5" FRNT 2.5 VS RR CDEV PAIR
Suspension Shock Absorber Set
SHOCK ABSORBER PAIR
2.5 SHOCKS W/ CDEV
100% Revalveable
100% Rebuildable
27821EP
