ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON'S Shock Absorbers, V.S. 2.5 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. The ICON CDC Valve is an externally adjustable valve that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges.
ICON 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune.
One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
TECH NOTE: Not compatible with Wrangler JL 4xe or Unlimited Rubicon 392 trims. See ICON Help Center for more information.
ICON's CDC Valve technology allows for 10 levels of high-resolution compression adjustability with the turn of a knob
TECH NOTE: Will not fit 2021-2023 Wrangler Unlimited Rubicon 392. See ICON Help Center for more information.
One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use
ICON 2018+ Jeep Wrangler JL 2.5in Rear 2.5 Series Shocks VS PB CDCV - Pair
PTFE lined spherical bearings and application specific mounting hardware
2018-UP JEEP JL 2.5" LIFT REAR 2.5 VS PIGGYBACK CDCV SHOCK PAIR
7/8” diameter induction hardened, chrome plated shock shaft
TECH NOTE: Compatible with 2.5-3" of rear lift over stock
Nitrogen charged monotube design with piggyback reservoir
6061 aircraft grade aluminum CNC machined components
2018-UP JL 2.5" REAR 2.5 VS PB CDCV PAIR
18-UP JL 2.5" REAR 2.5 VS PB CDCV PAIR
18-23 JL 2.5" REAR 2.5 VS PB CDCV PAIR
Suspension Shock Absorber Set
JL 2.5 REAR W/ CDCV
SHOCK ABSORBER PAIR
100% Revalveable
100% Rebuildable
27726CP
