ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON'S Shock Absorbers, V.S. 2.5 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. If you are looking for a more user defined tune, consider looking into the Compression Damping Control Valve (CDCV) shocks.
ICON 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune.
TECH NOTE: Only compatible with models equipped with 3.6L V6 gasoline engine. Not compatible with Wranglers equipped with 3.6L V6 eTorque engine.
All ICON 2.5 Series Piggyback and Remote Reservoir shocks can be upgraded to ICON’s Compression Damping Control Valve (CDCV)
One piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use
2018-UP JEEP WRANGLER JL/GLADIATOR JT 2.5" LIFT FRONT 2.5 VS REMOTE RESERVOIR SHOCK PAIR
TECH NOTE: Gladiator Mojave trim requires 14mm misalignment spacer kit, part # 611070.
TECH NOTE: Only fits models equipped with 3.6L "Pentastar" V6 gasoline engine.
PTFE lined spherical bearings and application specific mounting hardware
ICON 2018+ Jeep Wrangler JL 2.5in Front 2.5 Series Shocks VS RR - Pair
7/8” diameter induction hardened, chrome plated shock shaft
Nitrogen charged monotube design with piggyback reservoir
6061 aircraft grade aluminum CNC machined components
20-UP JT/18-UP JL 2.5" FRONT 2.5 VS RR PAIR
20-23 JT/18-23 JL 2.5" FRONT 2.5 VS RR PAIR
JL/JT 2.5" FRONT 2.5 VS RR PAIR
Suspension Shock Absorber Set
SHOCK ABSORBER PAIR
100% Rebuildable
100% Revalveable
JL 2.5 FRONT RR
27821P
