ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON shock absorbers, V.S. 2.5 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications, ICON’s unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal “Bump Zone” that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. The ICON CDC Valve is an externally adjustable valve that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges.
ICON VS 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. They feature piggyback reservoirs and are 100% rebuildable/revalveable.
APPLICATION NOTE #584: Tuning and length optimized for use with ICON .5" Lift Performance Rear Coil Springs, part number 214206
One piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
ICON's CDC Valve technology allows for 10 levels of high-resolution compression adjustability with the turn of a knob
Tuning and length optimized for use with ICON .5" Lift Performance Rear Coil Springs (ICON part # 214206)
One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
Piggyback reservoir design improves heat dissipation to reduce shock fade during prolonged use
Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
Polyurethane bushings and forged steel mounting stems for OE factory type fitment
ICON 2014+ Ram 2500 .5in Performance Rear 2.5 Series Shocks VS PB CDCV - Pair
PTFE lined spherical bearings and application specific mounting hardware
APPLICATION NOTE #105: Not for vehicles with rear factory air ride
2014-UP RAM 2500 .5" PERFORMANCE REAR 2.5 VS PIGGYBACK CDCV PAIR
7/8” diameter induction hardened, chrome plated shock shaft
Nitrogen charged monotube design with piggyback reservoir
14-UP RAM 2500 .5" PERFORMANCE REAR 2.5 VS PB CDCV PAIR
14-26 RAM 2500 .5" PERFORMANCE REAR 2.5 VS PB CDCV PAIR
6061 aircraft grade aluminum CNC machined components
RAM 2500 .5" PERF REAR 2.5 PB CDCV PAIR
Suspension Shock Absorber Set
2.5 PIGGYBACK SHOCKS
SHOCK ABSORBER PAIR
100% Revalveable
100% Rebuildable
217705CP
