ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON shock absorbers, V.S. 2.5 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications, ICON’s unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal “Bump Zone” that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. If you are looking for a more user defined tune, consider looking into the Compression Damping Control Valve (CDCV).
ICON Vehicle Specific 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured for each application in both length and damping tune.
All ICON 2.5 Series Piggyback and Remote Reservoir shocks can be upgraded to ICON’s Compression Damping Control Valve (CDCV)
One piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use
ICON 1999+ Ford F-250/F-350 Super Duty 3-6in Rear 2.5 Series Shocks VS PB - Pair
PTFE lined spherical bearings and application specific mounting hardware
APPLICATION NOTE #492: Compatible with 3-6" of rear lift over stock
APPLICATION NOTE #3: Will not fit F-350/F-450 cab & chassis models
1999-UP FORD SUPER DUTY 3-6" LIFT REAR 2.5 VS PIGGYBACK SHOCK PAIR
7/8” diameter induction hardened, chrome plated shock shaft
Nitrogen charged monotube design with piggyback reservoir
6061 aircraft grade aluminum CNC machined components
APPLICATION NOTE #150: Shocks are fully serviceable
99-UP FSD 3-6" REAR 2.5 VS PB PAIR
99-26 FSD 3-6" REAR 2.5 VS PB PAIR
Suspension Shock Absorber Set
99-UP FSD 3-6" REAR 2.5 PB
100% Rebuildable
100% Revalveable
FSD REAR SHOCKS
37701P
