ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON'S Shock Absorbers, V.S. 2.5 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. The ICON CDC Valve is an externally adjustable valve that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges.
ICON 2.5 Series shocks are configured specifically for each application. These hardcore units are fitted with piggyback reservoirs to stay cooler during intense wheeling and ICON’s CDCV which offers 10 adjustment points.
One piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
One-piece, hard anodized, impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
ICON's CDC Valve technology allows for 10 levels of high-resolution compression adjustability with the turn of a knob
APPLICATION NOTE #55: Shocks are fully serviceable. Lift heights indicated are for a stock equipped vehicle.
APPLICATION NOTE #129: Will not work with factory installed electronically controlled suspension.
Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
ICON 04-08 Ford F-150 4WD / 2009+ Ford F-150 2/4WD Rear 2.5 Series Shocks VS PB CDCV - Pair
Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use
APPLICATION NOTE #669: Compatible with 0-1" of rear lift over stock on most F-150 models
PTFE lined spherical bearings and application specific mounting hardware
2009-UP F150 2/4WD 04-08 F150 4WD REAR 2.5 VS PIGGYBACK CDCV SHOCK PAIR
APPLICATION NOTE #234: Will not fit F-150 Tremor or F-150 Raptor
7/8” diameter induction hardened, chrome plated shock shaft
Nitrogen charged monotube design with piggyback reservoir
09-UP F150 2/4WD 04-08 F150 4WD REAR 2.5 VS PB CDCV PAIR
09-26 F150 2/4WD 04-08 F150 4WD REAR 2.5 VS PB CDCV PAIR
6061 aircraft grade aluminum CNC machined components
09-UP/04-08 F150 REAR 2.5 PB CDCV PAIR
Suspension Shock Absorber Set
REAR SHOCK ABSORBERS
100% Rebuildable
100% Revalveable
SHOCK ABSORBERS
97720CP
