Ht Silicone Coatings solve the problem of exhaust wraps deteriorating because of dirt and debris hitting it. It seals and protects wraps and extends the life of the wrap. The High Temperature (HT) Silicone Coating provides lasting protection for any hot surface up to 1500 degrees. DEI recommend the use of this coating with their exhaust wrap because it seals the material and provides lasting protection from oil, dirt and road grime. Don't limit the use to exhaust header wrap, this products works well on headers, blocks, starters and even on your grill at home. HT Silicone Coating is VOC (Volatile Organic Compounds) compliant in all 50 states. For use with all DEI exhaust wraps, HT Silicone Coating penetrates, seals and protects as well as helping to extend the lifespan of all DEI exhaust wraps. See special instructions below for best adhesion on Titanium exhaust wrap products. Protection from abrasions, oil, and grime Withstands up to 1500°F For use on exhaust wraps, engine blocks, pipes, manifolds & more 12 oz. can Cure temperature: 400°F Cure time: 2 hours Titanium Application Instructions While not required for Titanium exhaust wrap, HT Silicone Coating will protect and prolong the life of the wrap. Due to the difference in material from glass fiber, HT Silicone Coating soaks into Titanium exhaust wrap's basalt fiber differently and needs a few coats and heat cycles for it to adhere properly. DEI recommends a minimum of three coats, each heat cycled for curing before applying the next coat. To cure, HT Silicone Coating needs to reach a temperature of 400°F for approximately 2 hours. Allow to cool before applying the next coat. * HT Silicone Coating is sold in a compressed aerosol container. Regulations restrict the air transport of flammable products (aerosols). If you are outside the continental USA and are interested in purchasing an aerosol based DEI product, please contact our offices for further information at 1-440-930-7940.
Restore, Protect, and Power Through the Heat Our High Temperature (HT) Silicone Coating is your go-to solution for restoring and protecting anything exposed to extreme heat. Originally developed to seal and protect exhaust wraps, this versatile spray also gives new life to BBQ grills, fire pits, smokers, outdoor stoves, engine parts, and more. Use it to refresh faded exhaust wraps and add a protective layer that locks in fibers, reduces fraying, and extends product life under the harshest conditions. It’s the perfect companion to any Design Engineering Inc (DEI) wrap installation. Beyond the garage, this high-temp coating works wonders on metal surfaces exposed to high heat — giving BBQ grills, fire pits, smokers, and outdoor equipment a like-new finish that resists rust, grime, and weathering. It withstands temperatures up to 1200°F and is VOC compliant in all 50 states for safe, worry-free use anywhere. NOTE: HT Silicone Coating is sold in a compressed aerosol container. Regulations restrict the air transport of flammable products (aerosols). If you are outside the continental USA and are interested in purchasing an aerosol based DEI product, please contact our offices for further information at 1-440-930-7940.
Titanium Application Instructions While not required for Titanium exhaust wrap, HT Silicone Coating will protect and prolong the life of the wrap. Due to the difference in material from glass fiber, HT Silicone Coating soaks into Titanium exhaust wrap's basalt fiber differently and needs a few coats and heat cycles for it to adhere properly. DEI recommends a minimum of three coats, each heat cycled for curing before applying the next coat. To cure, HT Silicone Coating needs to reach a temperature of 400°F for approximately 2 hours. Allow to cool before applying the next coat.
Restores and Protects Faded Surfaces – Bring back the clean look of grills, fire pits, and other high-temp metal surfaces
010302; ht; spray; high temperature; high temp; silicone; coating; paint; heat resistant; aluminum; silver
Shields Against the Elements – Helps guard against oil, dirt, moisture, rust, and surface wear
Multi-Use Formula – Great for automotive, outdoor, and home heat-related projects
Protects Exhaust Wraps – Seals fibers to reduce fraying and prolong wrap life
Fast Application & Cure – 12 oz. spray can with a 2-hour cure time at 400°F
Withstands High Heat – Rated for direct heat exposure up to 1200°F
VOC Compliant in All 50 States – Legal and safe to use nationwide
DEI HT Silicone Coating Aluminum - (6 Per Master Carton) (Aerosol)
One can of high-temp silicone coating in aluminum.
Hi-Temp Silicone Coating™ Spray; Aluminum;
Hi-Temp Silicone Coating Spray - Aluminum
Hi-Temp Silicone Coating Aluminum 12 oz.
Hi-Temp Silicone Coating Spray Aluminum
Hi-Temp Silicone Coating™ Spray
12 oz. Spray Can
HI-TMP SILCN-ALM
HighHeatSprCoat
Engine Paint
Universal
