This allows BMR to offer a LIFETIME WARRANTY against spring sag.Blending aesthetics and performance, BMR has designed the SP073 for the hardcore handling crowd. These springs will drop the front of your GT500 approximately 1-inch and feature a fine-tuned spring rate to give you great handling. The 260 lb./inch linear rate spring offers plenty of support, keeping the body flat and level in the corners. The lowered stance and increased spring rate decreases body roll and gives you a lower center of gravity for increased driver control in aggressive cornering situations. Combine this with BMR adjustable sway bars and you have the ultimate in handling and performance. When performance and looks are a must, rely on BMR's suspension!BMR rear springs retain the factory "hourglass" shape designed by Ford engineers. This important feature provides a "variable natural frequency" in the spring to help counteract damaging wheel hop. This is a feature of the OE springs often overlooked by other companies simply because they don't realize it's benefits in multi-purpose applications.BMR's suspensions SP073 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.
There is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR's suspension believes the right springs go beyond looks your S197 needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR'spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths.
These springs will lower the front of your GT500, and feature a fine-tuned spring rate to give you great handling.
Suspension Struts / Shock Absorbers / Coil Springs / Camber Plate Kit
BMR 07-14 Shelby GT500 Front Handling Version Lowering Springs - Red
Cold wound on a CNC Coiling Machine to exact specifications
Manufactured from chrome silicon high-tensile spring wire
Lowers the front of your GT500 approximately 1.5-inches
Computer tested for accurate height and spring rate
Designed for hardcore handling applications
Lowering Springs, Front, Handling, GT500
260 lb/inch front linear spring rates
Lifetime warranty against spring sag
Improves handling and ride quality
Stress-relieved at 750 degrees F
BMR Suspension - SP073R
Lower center of gravity
Improved driver control
Decreased body roll
Made in the U.S.A.
Lowering Springs
Shot-peened
