Search
Filters
Close
Vehicle Fitment CheckConfirm vehicle details before checkout
Secure SSL CheckoutYour data is always protected
Fast, Easy ShippingShips from trusted partners
Parts Legion on eBayVisit our store

Parts Legion product listing

21-24 Ford F150 Raptor 4WD 2-2.25in Stage 2 Suspension System w/ Billet UCA

ICON Part number: K93172 In stock
Ready for checkout Secure this part for your build
$2,695.35
Secure checkout Availability and delivery details shown below Ask for fitment help
Availability: In stock
Part number: K93172
Manufacturer: ICON
21-24 Ford F150 Raptor 4WD 2-2.25in Stage 2 Suspension System w/ Billet UCA
In stock — usually ships within 1 business day

Transform your 2021-2024 Gen3 F-150 Raptor’s performance and stance with the ICON Vehicle Dynamics Stage 2 suspension system, engineered specifically for vehicles equipped with OE shock absorbers. The front coil springs utilize a linear spring rate for consistent performance and precise handling while delivering 2.25" of front lift for standard Raptors and 2" for Raptor R models, ensuring an aggressive look and increased ground clearance. Designed for seamless compatibility, they maintain full electronic shock functionality while enhancing your truck's capability and ride quality.

The triple-rate rear coil springs are tailored to deliver a 1" lift on Raptors without additional rear weight. ICON-engineered droop, ride, and overload rates ensure optimal suspension performance across a variety of driving conditions. The performance ride rate balances comfort and compliance, while the overload rate enhances load handling and bottom-out resistance. For maximum articulation and efficiency, the rear coils feature a tapered wire design, providing exceptional droop travel and off-road capability.

Built for both durability and ease of installation, these springs feature a dual-stage powder coating that protects against corrosion in any environment. Their bolt-on design eliminates the need for cutting or modifications, allowing for a straightforward install. Backed by a lifetime guarantee against sagging or breakage, these coil springs redefine your Raptor’s on- and off-road performance, delivering unmatched reliability and confidence wherever the journey takes you.

The included ICON billet aluminum upper control arm kit is designed to improve the overall performance of the new 2021-2024 Ford F-150 Raptor with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.

Transform your Gen3 F-150 Raptor’s stance with the ICON Vehicle Dynamics Stage 2 suspension system. Designed for seamless compatibility, maintaining electronic shock functionality while enhancing your truck's capability and ride quality.

APPLICATION NOTE #85: Advertised lift height ranges are for a stock equipped vehicle. Increasing weight of vehicle due to accessories will alter lift range.

Performance rear ride rate for compliance and comfort, overload rate for load and bottom out resistance, extra soft initial rate for maximum droop travel

Recommended Aftermarket Tires (w/o 37 Package): 35" x 12.50" (Larger Tires May Fit but Fender Trimming and Modifications will be Required)

Recommended Aftermarket Tires (w/ 37 Package): 37" x 12.50" (Larger Tires May Fit but Fender Trimming and Modifications will be Required)

Billet aluminum UCAs for added strength, durability, and on-vehicle caster/camber adjustment for optimum drivability

UCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation

APPLICATION NOTE #187: Only fits OE coilovers. Will not fit ICON or other aftermarket coilovers.

Front coils yield 2.25" front lift height over stock on Raptor or 2" of front lift on Raptor R

Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 5” Backspace / 6mm Offset

Vehicle specific design for the Gen3 F-150 Raptor equipped with OE shock absorbers

Triple rate rear coil springs with ICON-engineered droop, ride, and overload rates

Significantly improves on- and off-road ride quality and performance over stock

1" rear lift height over stock on Raptors without additional weight in the rear

APPLICATION NOTE #180: Do not combine with coil spacers or damage may occur

21-24 Ford F150 Raptor 4WD 2-2.25in Stage 2 Suspension System w/ Billet UCA

Tapered wire rear coil design achieves maximum travel and efficiency

TECH NOTE: Provides 2.25" of front lift over stock on F-150 Raptor

TECH NOTE: Provides 2" of front lift over stock on F-150 Raptor R

Compatible with all versions of available OE shock absorbers

Dual stage powder coating for maximum corrosion resistance

21-24 FORD F150 RAPTOR 2-2.25" STAGE 2 SUSPENSION SYSTEM

Bolt-on installation with no cutting required

Lifetime guarantee against sagging/breakage

Maintains electronic shock functionality

OEM Wheels & Tires Fitment: Yes

Linear rate front coil springs

Suspension Lift Kit

SUSPENSION SYSTEM

K93172

No vehicle listing found We do not have a vehicle-specific fitment row for this product yet.

This does not automatically mean the part is universal. Send us your year, make, model, trim, and the part number before ordering.

Ask fitment help

Product tags