The ICON Vehicle Dynamics Stage 7 6" Suspension System with CDXS delivers an advanced suspension package for the 2022-2026 Toyota Tundra, combining premium shock technology, extensive adjustability, and heavy-duty components engineered for exceptional performance on and off the road. Designed for drivers seeking increased suspension control and tuning capability, this system features ICON 2.5 Series front coilovers and rear shocks with remote reservoirs that provide superior damping performance, increased fluid capacity, and improved heat dissipation for consistent performance during extended off-road use. Equipped with ICON CDXS technology, all shock absorbers feature independent high-speed and low-speed compression damping adjustment, allowing precise tuning of handling response, ride quality, and suspension aggressiveness across a wide range of driving conditions. The system allows for up to a 40% increase in front wheel travel over stock without overstressing OE components and features adjustable front ride heights from 5-6 inches of lift. Through innovative engineering, the system achieves a full 6 inches of front lift with only 4 inches of crossmember drop, maximizing ground clearance while minimizing CV joint angles.
Tubular upper control arms equipped with ICON's patented Delta Joint Pro (U.S. Pat. 10,731,700) provide increased strength, exceptional durability, improved caster correction for enhanced drivability, and 90 degrees of total articulation for unrestricted suspension movement. The system maintains factory track width while optimized suspension geometry nearly eliminates the bump steer common to stock Tundras. High-strength one-piece ductile iron steering knuckles, high-clearance CNC laser-cut and brake-formed 1/4-inch steel crossmembers, and an integrated front skid plate provide the durability and protection required for demanding off-road conditions. High-angle greaseable outer tie rods, sway bar drop brackets, heavy-duty front and rear bump stop brackets, improved rear sway bar links and mounts, and a rear track bar bracket work together to maintain proper suspension geometry and reduce bind throughout the suspension's range of motion.
ICON-engineered custom triple-rate rear coil springs provide progressive spring rates for a comfortable on-road ride while delivering the stability and control needed during aggressive off-road driving. Tubular rear upper and lower links improve rear suspension articulation while providing additional strength and allowing for pinion angle adjustment to optimize driveline geometry at lifted ride heights. An on-vehicle adjustable billet rear track bar allows precise rear axle centering while improving rear suspension performance. The result is a complete, high-performance suspension system that delivers exceptional ride quality, advanced damping adjustability, and increased off-road capability with the clearance to fit 37-inch tires at full articulation.
The ICON Stage 7 6" Suspension System with CDXS delivers an advanced suspension package for the 2022-2026 Toyota Tundra, combining premium damping technology, increased adjustability, and heavy-duty components.
ICON engineered custom triple rate rear coil springs provide progressive spring rates for a comfortable ride on-road as well as stability and control during aggressive off-road driving
APPLICATION NOTE #141: Tundra/Sequoia equipped with Automatic Leveling Headlights or Load-Leveling Rear Height Control Air Suspension part # 55153 is also required
All shock absorbers equipped with ICON CDXS for independent adjustability of high speed and low speed compression force for handling response and aggressiveness
APPLICATION NOTE #85: Advertised lift height ranges are for a stock equipped vehicle. Increasing weight of vehicle due to accessories will alter lift range.
APPLICATION NOTE #450: Provides 3" of rear lift on a Tundra equipped with TRD Off-Road, TRD Sport, or TRD Rally suspension packages and TRD Pro.
APPLICATION NOTE #406: Most Tundra sub-models equipped with i-Force MAX hybrid engine will have front lift height range of 4.5-5.5" over stock.
2.5 Series front coilovers and rear shocks with remote reservoirs for superior damping and vehicle control along with improved shock cooling
APPLICATION NOTE #405: Most Tundra sub-models equipped with i-Force gasoline engine will have front lift height range of 5-6" over stock.
Optimized design to fit 37" tires with full articulation (larger tires may fit but fender trimming and modifications will be required)
Patented Delta Joint Pro (U.S. Pat. 10,731,700) provides improved durability and serviceability with 90 degrees of total articulation
Recommended Aftermarket Tires: 37" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.)
Adjustable front ride heights from 5-6” of front lift over stock (up to 6" of lift with only 4" of crossmember drop)
On-vehicle adjustable billet rear track bar properly centers rear axle while also improve rear suspension performance
APPLICATION NOTE #142: Not compatible with vehicles equipped with Load-Leveling Rear Height Control Air Suspension.
Hight clearance front crossmembers and front skid plate, CNC Laser Cut and brake-formed from 1/4-inch steel plate
Tubular UCAs with Delta Joint Pro for added strength, durability, and caster correction for improved drivability
APPLICATION NOTE #407: Tundra SR5 with TRD Sport package will have front lift height range of 6-7" over stock.
APPLICATION NOTE #55: Shocks are fully serviceable. Lift heights indicated are for a stock equipped vehicle.
Improved rear sway bar links and mounts, and rear track bar bracket to reduce bind in the rear suspension
System allows for up to 40% increase in front wheel travel over stock without overstressing OE components
APPLICATION NOTE #155: Requires recalibration of Advanced Driver Assistance Systems (ADAS) after install
Tubular rear upper and lower links improve rear end articulation and allow for pinion angle adjustment
APPLICATION NOTE #408: Tundra TRD Pro will have front lift height range of 3.25-4.25" over stock.
APPLICATION NOTE #153: Not compatible with Adaptive Variable Suspension (AVS) equipped vehicles
Recommended Aftermarket Wheels: ICON Alloys - 20x9" w/ 5.625” Backspace / 16mm Offset
Optimized suspension geometry nearly eliminates the bump steer found in stock Tundras
High angle outer tie-roads feature durable, metal on metal greaseable tie rod ends
Single piece high-strength ductile iron steering knuckles with built-in 4" drop
ICON 22-24 Toyota Tundra 6in Lift Stage 7 Suspension System - Tubular - CDXS
Included sway bar drop brackets reduce bind in OE sway bar links
APPLICATION NOTE #381: Requires minimum of 20" diameter wheels
22-26 TOYOTA TUNDRA 6" STAGE 7 SUSPENSION SYSTEM TUBLUAR CDXS
Front and rear heavy-duty bump stop brackets
OEM Wheels & Tires Fitment: No
Maintains factory track width
Suspension Lift Kit
SUSPENSION SYSTEM
K53277TD
