ICON Intelligent Control (IIC) uses onboard sensors to monitor G-forces and movement of vehicle chassis along with user defined settings to actively make on-the-fly, near instantaneous compression damping adjustments on CDEV-equipped shocks
TECH NOTE: Provides 3" of rear lift on a Tundra equipped with TRD Off-Road or TRD Sport suspension packages and TRD Pro. A Tundra without TRD Off-Road or TRD Sport suspension packages will net 3.5" of rear lift.
Billet rear upper and high clearance lower links improve rear end articulation and allow on-vehicle adjustment for different ride heights and pinion angles using ICON's double adjuster system
ICON engineered custom triple rate rear coil springs provide progressive spring rates for a comfortable ride on-road as well as stability and control during aggressive off-road driving
APPLICATION NOTE #141: Tundra/Sequoia equipped with automatic leveling headlights or Load-Leveling Rear Height Control Air Suspension, part # 55153 is also required
APPLICATION NOTE #85: Advertised Lift Height Ranges Are For A Stock Equipped Vehicle. Increasing Weight Of Vehicle Due To Accessories Will Alter Lift Range.
ICON's Compression Damping Electronic Valve (CDEV) technology allows for in vehicle adjustment of compression damping settings and active adjustment via IIC
2.5 Series front coilovers and rear shocks with remote reservoirs for superior damping and vehicle control along with improved shock cooling
Billet aluminum UCAs with Delta Joint Pro for added strength, durability, and on-vehicle caster/camber adjustment for optimum drivability
Optimized design to fit 37" tires with full articulation (larger tires may fit but fender trimming and modifications will be required)
Patented Delta Joint Pro (U.S. Pat. 10,731,700) provides improved durability and serviceability with 90 degrees of total articulation
TECH NOTE: Most Tundra sub-models equipped with i-Force MAX hybrid engine will have front lift height range of 4.5-5.5" over stock.
TECH NOTE: Most Tundra sub-models equipped with i-Force gasoline engine will have front lift height range of 5-6" over stock.
Recommended Aftermarket Tires: 37" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.)
Adjustable front ride heights from 5-6” of front lift over stock (up to 6" of lift with only 4" of crossmember drop)
On-vehicle adjustable billet rear track bar properly centers rear axle while also improve rear suspension performance
APPLICATION NOTE #142: Not compatible with vehicles equipped with Load-Leveling Rear Height Control Air Suspension.
Hight clearance front crossmembers and front skid plate, CNC Laser Cut and brake-formed from 1/4-inch steel plate
APPLICATION NOTE #55: Shocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle.
System allows for up to 40% increase in front wheel travel over stock without overstressing OE components
Improved rear sway bar links and mounts, and rear track bar bracket to reduce bind in the rear suspension
APPLICATION NOTE #155: Requires recalibration of Advanced Driver Assistance Systems (ADAS) after install
TECH NOTE: Tundra SR5 with TRD Sport package will have front lift height range of 6-7" over stock.
Billet rear lower links have replaceable nylon rock sliders to protect the links from trail damage
APPLICATION NOTE #153: Not compatible with Adaptive Variable Suspension (AVS) equipped vehicles
APPLICATION NOTE #198: An iOS operated device is required to run ICON Intelligent Control app
Recommended Aftermarket Wheels: ICON Alloys - 20x9" w/ 5.625” Backspace / 16mm Offset
TECH NOTE: Tundra TRD Pro will have front lift height range of 3.25-4.25" over stock.
Optimized suspension geometry nearly eliminates the bump steer found in stock Tundras
High angle outer tie-roads feature durable, metal on metal greaseable tie rod ends
Single piece high-strength ductile iron steering knuckles with built-in 4" drop
Included sway bar drop brackets reduce bind in OE sway bar links
22-24 TOYOTA TUNDRA 6" STAGE 9 SUSPENSION SYSTEM BILLET UCA
TECH NOTE: Requires minimum of 20" diameter wheels
Front and rear heavy-duty bump stop brackets
OEM Wheels & Tires Fitment: No
Maintains factory track width
Suspension Lift Kit
SUSPENSION SYSTEM
K53279
