Fleece Performance 11-16 GM 2500/3500 Duramax LML CP3 Conversion Hardware Kit w/o Pump

Convert your LML's fuel system from a CP4 to a CP3. Improve your LML Duramax's reliability and fueling capability with a CP3 conversion. Since its introduction, the CP4 has proven to be less reliable and less capable than the CP3 used in previous Duramax platforms. Failures of the CP4 are extremely costly and require replacement of the entire fuel system. Avoid a costly failure down the road and convert your CP4 to a CP3 on the 2011-2016 LML Duramax platform. Our kits provide you with OEM quality components including a brand new Bosch CP3, Fleece exclusive molded hoses for the fuel feed and return, high flow CP3 fuel fittings, and our valley feed line to support aftermarket lift pump and filter applications. This kit does not include a CP3 injection pump. Features: High flow CP3 feed and return fittings Preformed feed and return fuel lines 50-state compliant EO# D-834-1 Kit Contents: CP3 to rail high pressure fuel line High flow CP3 feed and return fuel fittings Preformed feed and return fuel lines CP3 mounting adapter Dosing injector feed line FCA extension harness Fuel temperature sensor mounting bracket Low pressure fuel feed lines Hardware kit Application Notes: No FCA regulator table changes are required when converting from the CP4 to a stock CP3 when using this kit. Patent Pending

Fleece Performance 11-16 GM 2500/3500 Duramax LML CP3 Conversion Hardware Kit w/o Pump

CP3 Conversion Hardware Kit (No Pump) for 2011-2016 LML Duramax

Recommended Cross Sell Skus - FPE-DMAX-CP3/FPE-34563

High flow CP3 feed and return fittings

Fleece Performance Fuel Pump Fitting

Preformed feed and return fuel lines

50-state compliant

Fuel Pump Fitting

EO# D-834-1