Versa-Shield was designed to protect starters from potential failure caused by under hood heat soak conditions. Constructed using an aluminized heat reflective material backed with a hi-temp rated glass fiber insulation barrier, Versa-Shield is capable of reflecting radiant heat up to 2000°F. Simply wrap desired component with Versa-Shield and trim excess material. Edges attach to itself using a hook & loop edge closure design. In most cases there is no need to remove component when installing Versa-Shield.
Versa-Shield was designed to protect starters from potential failure caused by under hood heat soak conditions. Constructed using an aluminized heat reflective material backed with a hi-temp rated glass fiber insulation barrier, Versa-Shield is capable of reflecting radiant heat up to 2000F. Simply wrap desired component with Versa-Shield and trim excess material. Edges attach to itself using a hook & loop edge closure design. In most cases there is no need to remove component when installing Versa-Shield.
DEI Versa-Shield (Starter Shield) 7in x 2ft Universal Heat Shield
Versa Heat Shield™; 7 in. x 24 in.; Smaller Retail Package;
Withstands 500 Degrees F Of Direct Heat/2000 Degrees Radiant
Protect Master Cylinders/Cool Cans/Distributor /Fuel Pumps
Edges Attach To Itself With Hook And Loop Closure Design
No Need To Remove Starter For Installation In Most Cases
One 7 inch by 24 inch Versa Shied.
Versa Shield(TM) Starter Shield
Can Easily Be Removed For Shows
Universal-Trim Length To Size
Versa Shield Starter Shield
7 in. Wide x 24 in. Long
VERSA SHIELD 7in.X24in.
Versa Shield 7in x 24in
Versa Heat Shield™
Exhaust Heat Shield
Heat Shield
Universal
