Cylinder Head Specifications: Combustion chamber volume:-?72cc, Intake runner volume:-?280cc /290cc (Raised .650in), Exhaust runner volume:-?100cc (Raised .250in), Intake valve diameter:-?2.20in, Exhaust valve diameter:-?1.81in, Valve stem diameter:-?11/32in, Valve guides:-?Manganese bronze, Deck thickness:-?5/8in, Pushrod diameter:-?3/8in, Valve angle:-?15, Exhaust port location:-?Raised .250in, Spark plug fitment:-?14mm x 3/4 reach, gasket seat. INSTALLATION NOTE: For headers, contact TTI (951) 371-4878. Offset intake rockers required, exhaust side accepts standard-spec rockers. May require additional pushrod hole clearance for some combinations. Bare heads will have valve guides and seats installed, but will require final sizing and a valve job to match the valves you will be using. These heads require the use of a 14mm x 3/4in reach, flat gasket spark plug with a heat range appropriate to your application. Deck thickness: 5/8in, pushrod diameter: 3/8in.
Cylinder Head Specifications: Combustion chamber volume: 72cc; Intake runner volume: 280cc /290cc (Raised .650"); Exhaust runner volume: 100cc (Raised .250"); Intake valve diameter: 2.20"; Exhaust valve diameter: 1.81"; Valve stem diameter: 11/32"; Valve guides: Manganese bronze; Deck thickness: 5/8"; Pushrod diameter: 3/8"; Valve angle: 15°; Exhaust port location: Raised .250"; Spark plug fitment: 14mm x 3/4 reach, gasket seat. INSTALLATION NOTE: For headers, contact TTI (951) 371-4878. Offset intake rockers required, exhaust side accepts standard-spec rockers. May require additional pushrod hole clearance for some combinations. Bare heads will have valve guides & seats installed, but will require final sizing and a valve job to match the valves you will be using. These heads require the use of a 14mm x 3/4" reach, flat gasket spark plug with a heat range appropriate to your application. Deck thickness: 5/8", pushrod diameter: 3/8".
The Edelbrock part #77949 Big Block Chrysler Max Wedge Victor Series cylinder head is used by many of the best racers in the country and are the best choice for all-out competition. Edelbrock engineers work with leading racers like Billy Glidden, John Urist and Pat Musi to produce the ultimate components for racing. The end results is a competition ready cylinder head that features a cylinder head which is compatible with OE valve train and pistons for bolt-on convenience while Victor cylinder head features raised runners, revised chambers and relocated valves for all-out competition.
Edelbrock Intake Manifold Gasket for 1985-1995, Chevy V6 200-229-262. Top quality Edelbrock gaskets ensure a perfect seal every time.
Chrysler:Big-Block B-Series:383 (6.3L)/400 (6.6L);Chrysler:Big-Block RB-Series:413 (6.8L)/426 (7.0L)/440 (7.2L)
Cylinder Head; Chrysler; Victor Max Wedge; for B/RB Big Chrysler Engines; Single Bare Casting Plus Valves
Edelbrock Cylinder Head Chrysler Victor Max Wedge for B/Rb Big Chrysler Engines Single Bare Casting
Edelbrock Cylinder Head; Chrysler; Victor Max Wedge; for B/RB Big Chrysler Engines; Single
Edelbrock; RB; B; Chrysler; Big Block; Head; Tempered A356; V8; Cylinder Heads; 77949
Edelbrock, RB, B, Chrysler, Big Block, Head, Tempered A356, V8, Cylinder Heads, 77949
Cylinder Head; Chrysler; Victor Max Wedge; for B/RB Big Chrysler Engines; Single
Victor RB/ B Big-Block Chrysler Max Wedge Cylinder Head W/ Valves
Victor RB/B Big-Block Chrysler Max Wedge Cylinder Head W/Valves
Edelbrock Cyl Heads-Race
Engine Cylinder Head
CYL HEADS-RACE
CYLINDER HEAD
{ eo : 2in.}
{"eo":"2"}
Cyl. Head