Sometimes space is limited. The AutoMeter Quad Gauge provides a solution to limited dashboard space while providing a clean look. Individual AutoMeter air core meter movements for each function provide the accuracy and durability required by even the most demanding applications. Includes a single wire 1/8” NPT temperature sender and a 1/8” NPT oil pressure sender. The voltmeter reads from 8-18v on negative ground electrical systems and fuel level resistance range is 240 ohms empty to 33 ohms full (compatible with AutoMeter’s 3262 fuel level sender).
Kit includes fuel level sender (240E/33F), oil pressure sender, water temperature sender, 2-wire hall-effect speed sender that is compatible with GM/Chrysler applications (7/8" - 18THD)
Speedometer has a simple push button, 2 mile drive calibration. No dip switches and can be reprogramed at any time to accommodate changes in gear ratio or wheel and tire combination.
Sending unit adapters (1/4", 3/8”, and 1/2" NPT adapters), bulb and socket assemblies, red and green bulb covers, mounting hardware, and detailed instructions for installation.
Tachometer is compatible with 0.5 - 6 pulse ignition signals (1-12 cylinder engines) with points, electronic, and most 12V high-performance racing ignitions.
AutoMeter’s race proven air-core electric instruments provide quick and accurate readings while keeping hazardous fluids outside of the vehicle
Speedometer features lit LCD odometer - capable of registering one-million miles with two resettable trip odometers
4 in 1 gauge design saves valuable real estate on your dash while allowing you to monitor critical parameters
Speedometer is compatible with most two wire sine wave and three wire hall effect vehicle speed sensors.
12 and 16 volt compatible, compatible with nearly every street car or race car electrical system
Traditional incandescent lighting illuminates around the perimeter of the dial
2 PC. GAUGE KIT, 3-3/8" QUAD & TACH/SPEEDO, 240-33 Ohm, ANTIQUE BEIGE
AutoMeter Gauge Kit 2 Pc. Quad & Tach/Speedo 3-3/8in. Antique Beige
3-3/8" QUAD GA & TACH/ SPEEDO COMBO
Highly polished chrome bezel
GA KT 3.4" Q RPM/SPD
Gauge Set
