COMP Cams Socket For CS Crank - ( COMP Cams 4793CPG )

When slipped on the end of a crankshaft, these specially designed sockets let you use a 1/2" drive ratchet or breaker bar to rotate the engine assembly. Our sockets also have the unique feature of a provision to hold our degree wheels or any wheel with a 1" or larger center hole. The knurled retaining nut actually sandwiches the degree wheel and holds it in place. This can then be loosened while on the crank snout so that you can turn the degree wheel independent of the engine, which is really handy when finding TDC.

For Chevrolet Small Block V8, 90? V6 and 4 Cyl., and Ford 4.6L; 1.255" ID with 3/16" Keyway; Specially designed 1/2" drive socket allows rotation of engine assembly; Knurled retaining nut that holds degree wheel in place; Can be loosened while on crank snout so that wheel can be turned independent of the engine when finding TDC

265, 283, 307, 302, 305, 327, 350, 383, 400, 427, L46, L48, L65, LM1, LT-1, L82, L81, LS9, L83, L98, L05, LG3, LG4, LT1, LT4, Camaro, Corvette, Chevelle, Stingray, Silverado, C10, Firebird, Chevrolet, Chevy, Small Block Chevy, Caprice, Malibu, Impala, Nova, 355, GEN1, Monte Carlo, S10

The COMP crankshaft socket for Chevrolet Small Block, 90 degree V6, GM 4 cyl and Ford 4.6 is the last crankshaft socket that you'll need. Featuring a 1/2" drive socket and a knurled nut, our socket is designed for use with a degree wheel.

Crankshaft Socket for Chevrolet Small Block, V6, 4 Cylinder and Ford 4.6L

COMP Cams Crankshaft Socket for Small Block Chevrolet

Engine Crankshaft Turning Socket Tool

Crank Socket SBC, V6, 4 Cyl, Ford 4.6

COMP Cams Socket For CS Crank

Socket, for CS Crank

Crnkshft Socket Tool

None