Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life. This case does not come with spider and side gears.
This case uses a 7/8in. diameter cross pin shaft. If you have the older design which used a 3/4in. cross pin shaft you will also need to purchase spider gear set YPKF8.8-S-31.
This case uses a 7/8" diameter cross pin shaft. If you have the older design which used a 3/4" cross pin shaft you will also need to purchase spider gear set YPKF8.8-S-31.
Yukon Gear Standard Open Carrier Case / Ford 8.8in / 31 Spline
Yukon standard open carrier case; Ford 8.8in.; 31 spline
Yukon standard open carrier case, Ford 8.8", 31 spline
8.8in. 31 spline standard Open case (7/8 X-PIN HOLE).
8.8" 31 spline standard Open case (7/8 X-PIN HOLE).
Fits Ford 8.8" with 31 spline axles
Fits Ford 8.8 in. w/31 Spline Axles
0.875 in. Cross Pin Shaft Diameter
0.875" cross pin shaft diameter
Does not include spider gears
Standard open carrier case
Differential Carrier
Differential Case
14-79 FRD/LIN/MER
YC F880502
