Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.
Late model AMC 35ft.s use a 7/16in. ring gear bolt. This carrier uses 3/8in. bolts. To use this gear set with a factory gear set that uses 7/16in. bolts you will need to ream the ring gear bolt holes out or purchase a gear set that uses 3/8in. bolts.
Late model AMC 35's use a 7/16" ring gear bolt. This carrier uses 3/8" bolts. To use this gear set with a factory gear set that uses 7/16" bolts you will need to ream the ring gear bolt holes out or purchase a gear set that uses 3/8" bolts.
Model 35 3.55 & up + 3.27, standard Open case, BLT, 1.560" side gear hub BORE, 1-5/8" tall.
Model 35 3.55/up+3.27; standard Open case; BLT; 1.560in. side gear hub BORE; 1-5/8in. tall.
Yukon Gear Standard Open Carrier Case / AMC Model 35 / 3.55+
Yukon standard open carrier case, AMC Model 35, 3.55 & up
Yukon standard open carrier case; AMC Model 35; 3.55/up
Does not include spider gears
Standard open carrier case
1.560 in. Side Gear Bore
3.54 ratio and up only
1.560" side gear bore
Differential Carrier
Differential Case
Fits AMC Model 35
06-68 JEP/AMM
YC D44590
