Significantly reduce rear cradle movement in your S550 or S650 Mustang with a Polyurethane Rear Cradle Bushing Kit from BMR's suspension. These bushings are made from low-deflection, 95-durometer polyurethane, which is known for its high stiffness, low friction and excellent stability. This product greatly reduces bushing deflection that occurs during acceleration, cornering, and braking with only moderate increases in NVH. Each bushing is designed to exact tolerances, which are designed by BMR. This allows for a perfect fit and increased performance for any driving style. The BMR Poly Rear Cradle Bushing Kit (BK047) greatly increases the rigidity and stability of the chassis to provide maximum control and consistency necessary for any form of competition or high performance street driving. Designed for street performance, drag race, and handling applications, BMR's suspension BK047 Poly Cradle Bushings are the perfect wheel hop solution for any S550 or S650 Mustang where NVH is not a concern. BMR's Rear Cradle Bushings reduce cradle movement over the stock rubber bushings. The OE bushings are designed with air pockets and are made from soft rubber. These voids, coupled with soft material produce excessive differential movement during normal and aggressive driving. BMR's poly cradle bushings replace the entire OE rubber bushing, minimizing differential movement by replacing the soft rubber OE bushings with solid two-piece poly bushings. This reduces cradle movement, reducing wheel hop and increases handling stability, while giving you a much-improved overall feel in any performance driving situation. BMR's suspensions BK047 Differential Busing Kit is available in red with zinc-coated hardware. Installation time is about 3-4 hours and may vary depending on stock bushing removal technique. Proudly made in the U.S.A.!
Designed for street performance, drag race, and handling applications, BMR Suspension BK047 Poly Cradle Bushings are the perfect wheel hop solution for any S550 or S650 Mustang where NVH is not a concern.
Designed for street performance, drag race, and handling applications
BMR 15-17 S550 Mustang Rear Cradle Bushing Kit (Polyurethane) - Red
Oversized 6061-T6 billet aluminum inner bushing sleeves
Fits 2015-2023 S550 and 2024 S650 Mustangs
95-durometer polyurethane cradle bushings
Suspension Subframe Bushing Kit
Bushing Kit, Rear Cradle, Poly
Proudly designed in the U.S.A.
Reduces bushing deflection
3-4 hour installation time
Proudly made in the U.S.A.
Greatly reduces wheelhop
BMR Suspension - BK047
Rear Cradle Bushings
