This fixed change arm is ideal for correcting excessive negative camber issues seen in lowered Scion tC's. The Scion tC comes from the factory with a cam bolt that provides +-1.25deg. This factory change is not enough change for lowered applications. By increasing the length of the rear upper control arm SPC Performance adds 2deg positive camber to the rear suspension that can then be dialed in with the OEM cam bolt. California Residents WARNING
This fixed change arm is ideal for correcting excessive negative camber issues seen in lowered Scion tC's. The Scion tC comes from the factory with a cam bolt that provides 1.25. This factory change is not enough change for lowered applications. By increasing the length of the rear upper control arm SPC Performance adds 2 positive camber to the rear suspension that can t hen be dialed in with the OEM cam bolt.
This fixed change arm is ideal for correcting excessive negative camber issues seen in lowered Scion tC's. The Scion tC comes from the factory with a cam bolt that provides 1.25. This factory change is not enough change for lowered applications. By increasing the length of the rear upper control arm SPC Performance adds 2 positive camber to the rear suspension that can then be dialed in with the OEM cam bolt.
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.
Rubber bonded bushings to retain factory ride quality
SPC Performance 05-10 Scion tC Rear Control Arm
SPC 67485 +2 FIXED REAR CONTROL ARM
Alignment Camber Fixed Change Arm
High strength steel construction
build in fixed camber change
Fixed +2 degrees of camber
2deg CONTROL ARM-SCION tC
2 CONTROL ARM-SCION tC
Requires one per wheel
FIXED CAMBER ARM
ADJ ARM EA
