A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.5-inch, 0.095-inch wall and 1.25-inch, 0.095-inch wall DOM tubing, deflection is eliminated with A-arms from BMR's suspension. BMR's AA037 Lower A-arms are equipped with greaseable, 95-durometer polyurethane bushings. Polyurethane bushings add a solid, more responsive feel over the stock rubber bushings. BMR's bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings.
BMR AA037 Lower A-arms are equipped with greaseable, 95-durometer polyurethane bushings. Polyurethane bushings add a solid, more responsive feel over the stock rubber bushings.
BMR 79-93 Mustang Fox Lower Control A-Arm Front w/ Spring Pocket/Tall Ball Joint - Red
Pre-assembled with new heavy-duty ball joints and polyurethane bumpstops
Improves steering feel and response for normal and performance driving
A-arms, Lower, Spring Pocket, Non-adj, Poly, Tall Ball Joint
Tall ball joints for improved geometry and handling
1.50-inch and 1.25-inch DOM steel construction
Greasable, 95-durometer polyurethane bushings
Eliminates lower A-arm deflection
Retains factory-style spring cup
Fixture welded for precise fit
Fits 1979-1993 Ford Mustang
does not require coil-overs
Proudly made in the U.S.A.
Durable powdercoat finish
BMR Suspension - AA037R
Suspension Control Arm
Non-adjustable design
Lower A-arms
