The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open up your Audi A3 and let that turbo spool. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, the SP3089 intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! On our dyno, the SP3089 put down an impressive 10 additional horsepower and 11 pound-feet of tire-scorching torque; This intake provides an aggressive and throaty tone that is unmatched in the aftermarket and one that you'll enjoy every time you smash the accelerator! Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in amazing finishes ? SP3089P (Polished), SP3089WB (Wrinkle Black), and finally SP3089WR (Wrinkle Red). To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Athletic and Sophisticated ? those are the words used to describe the 2017-2020 Audi A3. The Audi A3 is a refined automobile that packs a punch when combined with the performance cold air intake from Injen Technology! Our engineering team here at Injen Technology took the all-new 2017-2020 Audi A3 equipped with the 2.0L Turbo engine deep into our R&D lab to extract the hidden power potential inside the engine and what've come up is nothing short of amazing. The system was a bit different than usual, as the 2017+ Front Wheel Drive Audi A3's utilize a cartridge MAF sensor cartridge that can't be removed. Our talented team got creative and designed an intake system that functions perfectly with the OE MAF cartridge and produces safe and reliable power!, , The OE intake tract is very restrictive from the factory and limiting power output by choking the turbo. Our new SP3089 short ram cold air intake opens up that intake tract with a large 3.0"aluminum intake tube that allows that turbo and engine to breathe deep and produce the power that you've been craving. , ,
Athletic and Sophisticated – those are the words used to describe the 2017-2020 Audi A3. The Audi A3 is a refined automobile that packs a punch when combined with the performance cold air intake from Injen Technology! Our engineering team here at Injen Technology took the all-new 2017-2020 Audi A3 equipped with the 2.0L Turbo engine deep into our R&D lab to extract the hidden power potential inside the engine and what've come up is nothing short of amazing. The system was a bit different than usual, as the 2017+ Front Wheel Drive Audi A3's utilize a cartridge MAF sensor cartridge that can't be removed. Our talented team got creative and designed an intake system that functions perfectly with the OE MAF cartridge and produces safe and reliable power!
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Short Ram Air Intake System; Incl. Tubing/SuperNano-Web Dry Filter/Hardware/Instruction; HP Gains +10 HP/Torque Gains +11 ft./lbs.; Wrinkle Red;
SP Short Ram Intake System, Part No. SP3089WR, 2017-2020 Audi A3 L4-2.0(t) FWD Only, MAF equipped vehicles only.
Injen 17-20 Audi A3 L4 2.0T (FWD & MAF Vehicles Only) Wrinkle Red SP Short Ram Intake
Includes custom heat shield w/cover specifically designed for this application
Smooth intake piping eliminates restrictions and improves airflow
Dyno Proven gains of up to 10 hp and 11 lb-ft. of torque
Fully serviceable Injen SuperNano-Web dry air filter
System is designed to reuse the factory MAF housing
Provides power gains while maintaining A/F ratios
Replacement air filter part number X-1078-BB
Only fits vehicles equipped with MAF Sensor
Injen Technology Limited Lifetime Warranty
Aggressive engine tone under full throttle
Optional hydroshield part number 1120BLK
Wrinke Red SP Short Ram Intake System
6061-T6 aluminum intake tubing
Available in multiple finishes
Made in Pomona, California USA
No additional tuning required
Short Ram Air Intake System
Short Ram Air Intake Design
Injen Short Ram Intake
Engine Cold Air Intake
Fits FWD vehicles only
Short Ram Intake
Excludes Quattro
Air Intake Kit
