This ICON Vehicle Dynamics 2.5-3” coilover system is a great way to lift your 4WD 2023-2025 Ford F-250/F-350 Super Duty while drastically improving ride quality and performance. The Stage 1 system is perfect for on-road and light duty off-road use including towing, job site duty and general off-road adventure. The advantage of utilizing a coilover conversion kit is that they have been designed to increase the overall damping ability of the vehicle while at the same time allowing for user-defined ride height adjustment. The 2.5" Remote Reservoir Coilover featured in these kits is based off of ICON’s 2.5 VS Series shock line - meaning that features like ICON engineered coil springs, FK Rod End bearings, and vehicle-specific valving come standard. ICON's Stage 1 System is comprised of ICON 2.5 Series remote reservoir coilovers with adjustable ride height, fabricated Radius arms, and ICON 2.0 Aluminum Series internal reservoir rear shocks. This stage sees the inclusion of the ICON Vehicle Dynamics Ford Super Duty Radius Arm System that feature a sealed pivot bushing that minimizes road feedback and ensures a long life and quiet operation. Additionally, their fabricated, fully boxed design ensures strength and utilizes a profile optimized for tire clearance at full steering lock, making a 37” tall tire clear without coming in contact with the radius arm. With the endless hours ICON has spent testing and tuning our suspension components and shocks as a complete package, you can rest assured you have the best suspension solution on the market.
TECH NOTE: Due to tight clearances and varying placement of vehicle’s wiring harness in the upper front-passenger wheel well area, installer must ensure adequate clearance between the harness, coilover reservoir, and other components to prevent chafing/damage to wire harness. If adequate clearance cannot be achieved, please contact ICON Customer Service.
ICON coilover conversion systems lift your Super Duty while improving ride quality and performance. With endless hours spent testing and tuning our suspension components and shocks, you’ll have the best suspension solution on the market.
TECH NOTE: Brake line kit (Part # 61111) is optional for end users who do not want to bend the factory steel lines or are looking for a braided stainless upgrade (not necessary for complete install)
Recommended Aftermarket Tires: 35" x 12.50" (37" x 12.50" tires may fit but fender trimming and modifications will be required.)
Fabricated radius arms offer on vehicle caster adjustment, increased strength, and improved tire clearance at steering lock
APPLICATION NOTE #55: Shocks are fully serviceable. Lift heights indicated are for a stock equipped vehicle.
TECH NOTE: Diesel models equipped with Tremor package will have front lift height range of 1.5-2" over stock
APPLICATION NOTE #88: Removal of the coil centering cup in factory coil bucket required for installation.
TECH NOTE: Gas models equipped with Tremor package will have front lift height range of 2-2.5" over stock
APPLICATION NOTE #155: Requires recalibration of Advanced Driver Assistance Systems (ADAS) after install
TECH NOTE: Diesel models without Tremor package will have front lift height range of 2.5-3" over stock
APPLICATION NOTE #161: If equipped with OnBoard Scales also requires sensor bracket part number 66203
TECH NOTE: Gas models without Tremor package will have front lift height range of 3-3.5" over stock
APPLICATION NOTE #30: An adjustable track bar is recommended to realign the axle but not required
TECH NOTE: ICON track bar bracket part # 64039 is also recommended to correct bump steer geometry
Icon 23-25 Ford F-250/F-350 Super Duty 4WD 2.5-3in Lift Kit - Stage 1 Coilover Conv. w/ Rad. Arms
APPLICATION NOTE #120: Secondary shock options available, Contact ICON for more details.
Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 5.25” Backspace / 6mm Offset
Recommended Aftermarket Wheels: ICON Alloys - 20x9" w/ 5.25” Backspace / 6mm Offset
Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 5” Backspace / 6mm Offset
TECH NOTE: Included rear shocks are compatible with 0-3" of rear lift over stock
23-25 FORD F250/F350 2.5-3" STAGE 1 COILOVER CONVERSION SYSTEM W/ RADIUS ARMS
Vehicle-specific shock valving provides unparalleled ride quality and control
ICON engineered coil springs guaranteed for life against sagging or breakage
Adjustable track bar ensures proper axle placement and improves handling
Corrosion resistant CAD plated coilover shock bodies with 7/8" shafts
APPLICATION NOTE #3: Not compatible with F-350 Cab & Chassis models
2.0 Aluminum Series internal reservoir rear shocks with 5/8" shafts
FK Rod End bearings for extended longevity and minimal deflection
Decreased body roll and improved on and off-road ride dynamics
Coilover conversion allows for addition of secondary shock
Ride height adjustable coilovers provide 2.5-3" of lift
Bolt-in system fits in OE coil bucket location
Shocks are fully rebuildable and revalveable
APPLICATION NOTE #1: Only fits 4WD models
OEM Wheels & Tires Fitment: Yes
Suspension Lift Kit
SUSPENSION SYSTEM
K63201R
