F-250 & F-350 PICKUPS and EXCURSIONS: Banks 4 inch Monster turbo-back stainless steel exhaust features streamlined turbine-outlet pipe, intermediate pipe and tailpipe all formed of stainless, heavy-wall tubing with constant-diameter bends to maximize flow, lower exhaust gas temps and slash backpressure up to 81%. (Available with or without a cast, large-bore Power Elbow housing). Designed to retain stock catalytic converter. The polished-stainless Monster muffler features a straight-through 4 inch diameter flow-path with a Banks-designed expansion chamber to dissipate the annoying mid-range exhaust drone that affects most straight-through designs. The muffler utilizes spun ceramic, very-high-temperature packing, more than doubles stock exhaust flow, and delivers an authoritative - but never intrusive - exhaust sound. And the 5 inch polished rolled-edge tip has an adjustable clamp for positioning on tailpipe. Get it in your choice of chrome-over stainless or high temp black! See this system with the black tip and no Power Elbow. (And to help keep it looking good, there's a 1/2 inch air gap to keep heat from tarnishing the finish). Important: Some vehicle configurations require an extension kit for proper fit. Pickups other than standard-cab long-bed or extended-cab short-bed require Exhaust Extension Kit. Extended Cab Long Bed #53517 required, Crew Cab Short Bed #53516 required, Crew Cab Long Bed #53518 required.

Stainless constant-diameter pipes and straight-thru muffler nearly doubles flow. Lower exhaust temps. Virtually no backpressure. Rich, throaty sound. Monster exhaust system flows better than stock and virtually eliminates backpressure. The streamlined intermediate pipe(s) and tailpipe are formed of stainless, heavy-wall tubing with constant-diameter bends to maximize flow and lower exhaust gas temps. Banks replaces the factory's restrictive muffler with a polished-stainless steel Monster muffler, featuring a straight-through flow-path with a Banks-designed expansion chamber which dissipates the annoying mid-range exhaust drone that's so prominent in competitors' straight-through mufflers. The muffler utilizes spun ceramic, very-high-temperature packing, more than doubles the stock flow and delivers an authoritative - but never intrusive - exhaust sound. A stainless steel tailpipe tip in your choice of polished chrome-over stainless or high-temp black sports a rolled edge. And to help keep it looking good, there's a 1/2 inch air gap to keep heat from tarnishing the finish. An adjustable clamp lets you position it on the tailpipe just right.

4 inch constant-diameter pipes;Straight-thru muffler;Cuts backpressure up to 81%;Turbo Back System;5 inch BLACK tip;Includes Power Elbow

Fits F-250/350 No cat converter;Does not fit trucks built in 1998;NOTE: Extension Kit required for ECSB, CCSB, CCLB. See description.

Banks Power 99-03 Ford 7.3L Monster Exh w/ Power Elbow - SS Single Exh w/ Black Tip

Monster Exhaust W/Power Elbow; S/S-Black Tip-1999-03 Ford 7.3L;W/O Cat Conv

Monster Exhaust System with Power Elbow, Single Exit, Black Round Tip

Monster Exhaust System with Power Elbow; Single Exit; Black Round Tip

1999-03 Ford 7.3L, without Catalytic Converter

Monster Exhaust W/Pwr Elbow

Exhaust System Kit