Edelbrock part #7194 Performer RPM Camshaft is designed for 1968 & Later Chrysler 383-400-440 V-8 applications. This Edelbrock cam kit produced 469 HP & 515 ft-lbs. of torque when used with #7193 intake and #60929 cylinder heads on a 440 engine. The camshaft works well with high-performance's street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft. Camshaft Specifications: - Duration @ .050 Intake: 238 degrees - Duration @ .050 Exhaust: 246 degrees - Lift @ Valve Intake: .480" - Lift @ Valve Exhaust: .495" - Lobe Separation: 110 Degrees - Intake Centerline: 105 Degrees - Idle Vacuum @ 1000 RPM's: 10"
Edelbrock part #7194 Performer RPM Camshaft is designed for 1968 & Later Chrysler 383-400-440 V-8 applications. This Edelbrock cam kit produced 469 HP & 515 ft-lbs. of torque when used with #7193 intake and #60929 cylinder heads on a 440 engine. The camshaft works well with high-performance's street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft.Camshaft Specifications:- Duration @ .050 Intake: 238 degrees - Duration @ .050 Exhaust: 246 degrees- Lift @ Valve Intake: .480"- Lift @ Valve Exhaust: .495"- Lobe Separation: 110 Degrees- Intake Centerline: 105 Degrees- Idle Vacuum @ 1000 RPM's: 10"
Edelbrock part #7194 Performer RPM Camshaft is designed for 1968 & Later Chrysler 383-400-440 V-8. This Edelbrock cam kit produced 469 HP & 515 ft-lbs. of torque when used with #7193 intake and #60929 cylinder heads on a 440 engine.
Performer-Plus Camshaft Kit for Big-Block Chrysler 383-400-440 V8
Chrysler:Big-Block RB Series:413 (6.8L)/426 (7.0L)/440 (7.2L)
Performer-Plus Camshaft Kit for Big-Block Chrysler 351 W V8
Edelbrock Perf RPM Cam and Lifters Kit Chrys 383-440
Edelbrock; Nitrous; Solenoid;?RPM; Racing; 72001
Take the Guesswork Out of Camshaft Selection!
CAMSHAFT KIT; CHRYSLER 440 PERFORMER RPM
Edelbrock Performer RPM Camshaft Kit
Engine Camshaft and Lifter Kit
Performer RPM Camshaft Kit
Cam Lift kit
{ eo : 5in.}
CAMSHAFTS
