Replace non-adjustable or corroded OE bolts on Dodge 3/4 and 1-ton trucks to achieve ± 1.50 ° degrees of caster adjustment as well as front pinion angle change. Whether the truck is lifted or stock ride height, this kit will help optimize caster and pinion angles for better tracking and axle/drive shaft alignment.
Replace the non adjustable or corroded OE bolts on Dodge 3/4 and 1-ton trucks to get +- 1.5 deg degrees of caster and pinion angle change. Whether the truck is lifted or stock ride height, optimize caster and pinion angles for better tracking and axle/drive shaft position. California Residents WARNING
Replace the non adjustable or corroded OE bolts on Dodge 3/4 and 1-ton trucks to get 1.5 degrees of caster and pinion angle change. Whether the truck is lifted or stock ride height, optimize caster and pinion angles for better tracking and axle/drive shaft position.
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.
700hr salt spray test ensures superior corrosion resistance
Restore lost adjustment due to breakage or corrosion
SPC Performance Dodge Caster/Pinion Cams
Alignment Caster / Pinion Angle Bolt Kit
Front Adjustment Range: Caster ±1.50°
Front Adjustment Range: Pinion ±1.50°
SPC 82395 ALIGN CASTER/PINION BOLTS
DODGE CASTER/PINION CAM
Required: 1 per axle
CAM BOLT EACH
CAM BOLT EA
