BMR's polyurethane, non-adjustable control arms for Mustangs (UTCA057) are CNC-machined from 6061-T6 billet aluminum. This design gives you an incredibly strong control arm that greatly improves performance. Greaseable, high-durometer bushings add a solid, more responsive feel over the stock rubber bushings. BMR's bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings. BMR's suspension designed the UTCA057 to work well in street performance, drag race, and handling applications. The stock control arm bushings deflect excessively under cornering loads giving you inconsistent handling characteristics. The UTCA057's heavy-duty construction and strong polyurethane bushings give you much improved repeatability on the street, starting line, or in the corners. The UTCA057s are primarily designed for lowered cars that are looking to remove the camber gained from lower than stock ride height vehicles. These are designed longer than factory arms, give you the ability to correct the camber setting on lowered S550s. ALL lowered cars will benefit from these parts IF you are looking to remove negative camber. For those looking to GAIN negative camber, these are not the correct choice. With a 1.2-inch drop, the most negative camber you can get will be approximately -2.0 degrees. These work very well for drag racers who have lowered ride heights, and are looking for ZERO camber. BMR's heavy-duty spherical bearings are designed to solidly link the spindle to the upper control arm, eliminate deflection and wheel alignment changes. On stock height cars, you cannot exceed -0.50 camber. BMR's S550 upper control arms add no noticeable NVH. These are the perfect upgrade for the enthusiast looking to improve performance at an affordable price.
BMR Suspension designed the UTCA057 to work well in street performance, drag race, and handling applications.
Designed longer than factory length to correct suspension geometry on lowered S550s
BMR 15-17 S550 Mustang Fixed Billet Aluminum Camber Link (Poly/Bearing) - Black
Designed for street performance, drag race, and road race applications
High-durometer internally fluted polyurethane greasable bushings
Camber link, fixed, poly/Bearing, billet aluminum
Improved Performance with zero increase in NVH
All 304 stainless steel rod end spacers
Alignment Caster / Camber Control Arm
CNC-machined 6061-T6 billet aluminum
Greatly reduces bushing deflection
Fits all 2015-newer Ford Mustang
Proudly designed in the U.S.A.
Proudly made in the U.S.A.
BMR Suspension - UTCA057
3 hour installation time
Durable anodized finish
Spherical Bearings
Camber Links
