SPC Performance 1 deg. 4X4 BUSHING

This sleeve will easily change Camber and/or Caster 1.00˚ for vehicles equipped with DANA 44 or GM 10 bolt axles. Installation requires removal of the upper ball joint stud nut. Break the taper free between the stud and sleeve, determine the change needed and replace the existing sleeve with the correct one. SPC 4169 spanner socket required for sleeve r emoval. Rotate sleeve to further fine tune Camber/Caster adjustment.

This sleeve will easily change Camber and/or Caster 1.00° for vehicles equipped with DANA 44 or GM 10 bolt axles. Installation requires removal of the upper ball joint stud nut. Break the taper free between the stud and sleeve, determine the change needed and replace the existing sleeve with the correct one. SPC 4169 spanner socket required for sleeve removal. Rotate sleeve to further fine tune Camber/Caster adjustment.

This sleeve changes camber and caster on many older model trucks and SUVs with Dana 44 or GMC 10 bolts axles. 4169 spanner socket is required for removal. Rotate sleeve to fine tune camber/caster adjustment. California Residents WARNING

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Easily adjusts camber / caster in vehicles equipped with DANA 44 or GM 10 bolt axles

Front Adjustment Range: Camber/Caster ±1.00°

Front Adjustment Range: Camber/Caster ±1.00˚

Recommended Tools: 4169 - Spanner Wrench

SPC Performance 1 deg. 4X4 BUSHING

Alignment Caster / Camber Bushing

SPC 23008 1 CASTER/CAMBER BUSHING

1deg CASTER/CAMBER BUSHING

1 CASTER/CAMBER BUSHING

Required: 1 per wheel

ALIGNMENT BUSHING

ALIGN BUSHNG