EBC S1 Kits Ultimax Pads and RK rotors - ( EBC S1KF1926 )

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

Save 15 percent over cost of buying separate parts with this quality pad and rotor kit which includes pads rotors and caliper lube. High efficiency Ultimax EBC pads built with Aramid fiber, fully shimmed and chamfered with patented EBC Brake-in coating for faster pad brake in after install. Rotors are a direct fit OEM replacement with geomet anti rust surface coating, fully balanced and runout tested for smooth braking

Save 15% over cost of buying separate parts with this quality pad and rotor kit which includes pads rotors and caliper lube. High efficiency Ultimax EBC pads built with Aramid fiber, fully shimmed and chamfered with patented EBC Brake-in coating for faster pad brake in after install. Rotors are a direct fit OEM replacement with geomet anti rust surface coating, fully balanced and runout tested for smooth braking

Save 10percent buying separate parts with EBC Brakes quality brake kit. High efficiency EBC pads with patented EBC Brake-in coating and premium rotors with thermic anti rust coating, fully balanced and run-out tested for smooth braking.

Save 10% from buying separate parts with EBC Brakes quality brake kit. High efficiency EBC pads with patented EBC Brake-in coating and premium rotors with thermic anti rust coating, fully balanced and run-out tested for smooth braking.

S1 Kits Ultimax 2 and RK Directional Rotors; Front; FMSI Pad No. D1653; Vented; 5 Bolt Holes; 300mm Dia.; 51mm Height; 28mm Thick; 108mm Center Hole Dia.;

S1KF Kit Number FRONT Disc Brake Pad and Rotor Kit UD16531+RK7674

Front S1K FMSI D1653 2013 and up LINCOLN MKZ 2.0 hybrid

Disc Brake Pad and Rotor / Drum Brake Shoe and Drum Kit

S1 Kits Ultimax 2 and RK Directional Rotors

EBC S1 Kits Ultimax Pads & RK rotors

2013 and up LINCOLN MKZ 2.0 hybrid

S1KF1926 FRONT EBC Stage 1 Kit

S1 Kits Ultimax and RK rotors

Kit components UD16531+RK7674

EBC Stage 1 Kit

UD16531+RK7674

DscBrkPadRtr