EBC S13 Brake Pad and Rotor Kit - ( EBC S13KF1104 )

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

Save 15 percent over cost of buying separate parts with this quality pad and rotor kit which includes pads rotorspads rotors and caliper lube. EBC flagship GG rated yellowstuff high friction pads for maximum brake effect fully shimmed chamfered and slotted finished wth patented EBC Brake in coating for fast pad seating. Matched with OEM style replacement rotors, coated with geomet anti rust surface coating, fully balanced and runout tested for smooth braking.

Save 15% over cost of buying separate parts with this quality pad and rotor kit which includes pads rotorspads rotors and caliper lube. EBC flagship GG rated yellowstuff high friction pads for maximum brake effect fully shimmed chamfered and slotted finished wth patented EBC Brake in coating for fast pad seating. Matched with OEM style replacement rotors, coated with geomet anti rust surface coating, fully balanced and runout tested for smooth braking.

Save 10percent buying separate parts with EBC Brakes quality brake kit. High efficiency EBC pads with patented EBC Brake-in coating and premium rotors with thermic anti rust coating, fully balanced and run-out tested for smooth braking.

Save 10% from buying separate parts with EBC Brakes quality brake kit. High efficiency EBC pads with patented EBC Brake-in coating and premium rotors with thermic anti rust coating, fully balanced and run-out tested for smooth braking.

S13 Kits Yellowstuff and RK Rotors; Front; FMSI Pad No. D525; Vented; 4 Bolt Holes; 235mm Dia.; 45mm Height; 18mm Thick; 54mm Center Hole Dia.;

S13KF Kit Number FRONT Disc Brake Pad and Rotor Kit DP4802R+RK418

Disc Brake Pad and Rotor / Drum Brake Shoe and Drum Kit

Front S13K FMSI D525 90 thru 94 MAZDA Miata MX5 1.6

EBC S13 Kits Yellowstuff Pads and RK Rotors

S13 Kits Yellowstuff and RK Rotors

S13KF1104 FRONT EBC Stage 13 Kit

90 thru 94 MAZDA Miata MX5 1.6

Disc Brake Pad and Rotor Kit

Kit components DP4802R+RK418

EBC Stage 13 Kit

DP4802R+RK418

DscBrkPadRtr