Search
Filters
Close

EBC 95-97 Ford Crown Victoria 4-6 ABS Steel PisTons Redstuff Rear Brake Pads - ( EBC DP31627C )

Availability: Special Order*
SKU: DP31627C
Manufacturer: EBC
Old price: $109.03
$103.58
Supported payment types:
VISA Accepted VISA Accepted VISA Accepted VISA Accepted VISA Accepted VISA Accepted Paypal Accepted AFFIRM Accepted

OR - Express Checkout

There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

Low dust EBC Redstuff is a superb pad for fast street use and targets high HP imports, muscle cars and prestige European cars. EBC Redstuff ceramic pads reduce dust emitted by OEM pads by approx 80 percent.

Rear Redstuff 3000 series Red Ceramic Pads are for the fastest street use or Premium sedan fitment. Both Red Ceramic and 7000 SUV pads are our lowest dust ranges

EBC 95-97 Ford Crown Victoria 4.6 (ABS) (Steel PisTons) Redstuff Rear Brake Pads

98 thru 2002 MERCURY Grand Marquis 4.6 (ABS) (Steel Pistons)

98 thru 2002 FORD Crown Victoria 4.6 (ABS) (Steel Pistons)

96 thru 97 MERCURY Grand Marquis 4.6 (ABS) (Steel Pistons)

Redstuff Premium Street REAR Disc Brake Pad Set FMSI D674

95 thru 97 FORD Crown Victoria 4.6 (ABS) (Steel Pistons)

99 thru 2002 LINCOLN Town Car 4.6 (ABS) (Steel Pistons)

96 thru 98 LINCOLN Town Car 4.6 (ABS) (Steel Pistons)

EBC Redstuff Ceramic Low Dust Brake Pads;

DP31627C REAR EBC Redstuff Pads

EBC REDSTUFF CERAMIC PADS

EBC Brakes Redstuff

Disc Brake Pad Set

EBC REDSTUFF PADS

Disc Brake Pad

There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

Low dust EBC Redstuff is a superb pad for fast street use and targets high HP imports, muscle cars and prestige European cars. EBC Redstuff ceramic pads reduce dust emitted by OEM pads by approx 80 percent.

Rear Redstuff 3000 series Red Ceramic Pads are for the fastest street use or Premium sedan fitment. Both Red Ceramic and 7000 SUV pads are our lowest dust ranges

EBC 95-97 Ford Crown Victoria 4.6 (ABS) (Steel PisTons) Redstuff Rear Brake Pads

98 thru 2002 MERCURY Grand Marquis 4.6 (ABS) (Steel Pistons)

98 thru 2002 FORD Crown Victoria 4.6 (ABS) (Steel Pistons)

96 thru 97 MERCURY Grand Marquis 4.6 (ABS) (Steel Pistons)

Redstuff Premium Street REAR Disc Brake Pad Set FMSI D674

95 thru 97 FORD Crown Victoria 4.6 (ABS) (Steel Pistons)

99 thru 2002 LINCOLN Town Car 4.6 (ABS) (Steel Pistons)

96 thru 98 LINCOLN Town Car 4.6 (ABS) (Steel Pistons)

EBC Redstuff Ceramic Low Dust Brake Pads;

DP31627C REAR EBC Redstuff Pads

EBC REDSTUFF CERAMIC PADS

EBC Brakes Redstuff

Disc Brake Pad Set

EBC REDSTUFF PADS

Disc Brake Pad

Write your own review
*
*
  • Bad
  • Excellent
*
*
*
*

Vehicle Fitment

Lincoln

    Town Car

      2010 Signature L - 2010 Signature Limited - 2010 Executive - 2010 Executive L - 2009 Executive - 2009 Executive L - 2009 Signature L - 2009 Signature Limited - 2008 Executive - 2008 Executive L - 2008 Signature L - 2008 Signature Limited - 2007 Designer Series - 2007 Executive - 2007 Executive L - 2007 Signature - 2007 Signature L - 2007 Signature Limited - 2006 Executive L - 2006 Executive - 2006 Signature Limited - 2006 Signature L - 2006 Signature - 2006 Designer Series - 2005 Signature - 2005 Signature L - 2005 Signature Limited - 2005 Executive - 2005 Executive L - 2004 Signature - 2004 Executive - 2004 Executive L - 2004 Ultimate - 2004 Ultimate L - 2003 Signature - 2003 Cartier - 2003 Cartier L - 2003 Executive - 2003 Executive L - 2003 Executive Protection Series - 2002 Executive - 2002 Executive L - 2002 Signature - 2002 Cartier - 2002 Cartier L - 2001 Cartier L - 2001 Cartier - 2001 Signature - 2001 Executive L - 2001 Executive - 2000 Cartier - 2000 Executive - 2000 Signature - 1999 Signature - 1999 Base - 1999 Cartier - 1999 Executive - 1998 Cartier - 1998 Executive - 1998 Base - 1998 Signature - 1997 Signature - 1997 Base - 1997 Executive - 1997 Cartier - 1997 Touring Edition - 1996 Anniversary - 1996 Cartier - 1996 Base - 1996 Executive - 1996 Signature

Ford

    Crown Victoria

      2002 Base - 2002 LWB - 2002 LX - 2002 Police Interceptor - 2002 S - 2001 Police Interceptor - 2001 S - 2001 LX - 2001 Base - 2000 LX - 2000 Police Interceptor - 2000 Base - 2000 S - 1999 Base - 1999 LX - 1999 S - 1999 Police Interceptor - 1998 Base - 1998 LX - 1998 Police Interceptor - 1998 S - 1997 S - 1997 Police Interceptor - 1997 LX - 1997 Base - 1996 Base - 1996 Police Interceptor - 1996 S - 1996 LX - 1995 Police Interceptor - 1995 LX - 1995 S - 1995 Base

Mercury

    Grand Marquis

      2002 GS - 2002 LS - 2001 LS - 2001 GS - 2000 GS - 2000 LS - 1999 GS - 1999 LS - 1998 LS - 1998 GS - 1997 GS - 1997 LS - 1996 GS - 1996 LS
*we take fitment seriously and have invested heavily into matching products to your vehicle, but it is up to the end user to confirm products are suitable for their vehicle, legal for them to use for the purposes they intend, and verify fitment upon installation. Many opened products may not be returned, so if fitment is in question, please contact us before ordering. We are not resonsible for any costs incurring from a product not being suitable to an end users application.