Search
Filters
Close

EBC 95-01 Ford Explorer 4-0 2WD Yellowstuff Front Brake Pads - ( EBC DP41199R )

Availability: Out of Stock - on backorder and will be dispatched once in stock.
SKU: DP41199R
Manufacturer: EBC
Old price: $208.15
$197.74
Supported payment types:
VISA Accepted VISA Accepted VISA Accepted VISA Accepted VISA Accepted VISA Accepted Paypal Accepted AFFIRM Accepted

OR - Express Checkout

EBC Yellowstuff is an aramid fibre based brake compound with high brake effect form cold and is possibly one of the first ever compounds that can be used for STREET AND TRACK DRIVING. These pads do not require warm up but do get even stronger under the heat of hard driving. These are not a low dust pad and if your desire is for a low dust premium street use pad, you should consider EBC Redstuff.When considering full race use, Yellowstuff has been a strong favourite, having been used for two years in the Swedish Camaro Cup and at numerous other race events where a stock caliper system is fitted.It is also the choice of 90-percent of the Mazda MX5 Miata competitors in the UK race series and has an unblemished record as rotor friendly track pad for vehicles up to 2000 lbs weight or 200 BHP.In the USA the SCCA and NASA drivershave been testing Yellowstuff with feedback and good reports POURING in from a 543 test driver major market proving event with these groups. Read that figure again 543 test drivers.There is no guesswork here.

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

Yellowstuff Pad for Sedans or maxi brake compound for Truck and SUV Yellow pads are our highest friction range. These come in two compounds, one for Truck and SUV upgrade and one for Race and street fastest use on Sedans and Muscle cars

EBC Brakes Yellowstuff pads are high friction coefficient spirited street pads, track capable on import, European sport, and fast imports. For trucks and SUV vehicles Yellowstuff pads are great for towing/hauling as well as off-road use.

Yellowstuff Our Flagship range FRONT Disc Brake Pad Set FMSI D652

EBC 95-01 Ford Explorer 4.0 2WD Yellowstuff Front Brake Pads

98 thru 2001 MERCURY Mountaineer 4.0 4WD

96 thru 2001 MERCURY Mountaineer 5.0 4WD

98 thru 2001 MERCURY Mountaineer 4.0 2WD

Yellowstuff Street And Track Brake Pads;

96 thru 2001 MERCURY Mountaineer 5.0 2WD

DP41199R FRONT EBC Yellowstuff Pads

95 thru 2001 FORD Explorer 4.0 2WD

2001 thru 2002 FORD Ranger 4WD 2.3

95 thru 2001 FORD Explorer 4.0 4WD

95 thru 2001 FORD Explorer 5.0 2WD

95 thru 2001 FORD Explorer 5.0 4WD

2001 thru 2002 FORD Ranger 2WD 2.3

98 thru 2002 FORD Ranger 4WD 4.0

98 thru 2002 FORD Ranger 2WD 2.5

98 thru 2002 FORD Ranger 2WD 4.0

98 thru 2002 FORD Ranger 4WD 3.0

98 thru 2002 FORD Ranger 4WD 2.5

98 thru 2002 FORD Ranger 2WD 3.0

95 thru 98 FORD Ranger 2WD 4.0

95 thru 98 FORD Ranger 4WD 2.3

95 thru 98 FORD Ranger 4WD 3.0

95 thru 98 FORD Ranger 4WD 4.0

95 thru 98 FORD Ranger 2WD 2.3

95 thru 98 FORD Ranger 2WD 3.0

2001 thru 2002 MAZDA B2300

98 thru 2001 MAZDA B2500

95 thru 2002 MAZDA B3000

95 thru 2002 MAZDA B4000

95 thru 97 MAZDA B2300

EBC YELLOWSTUFF PADS

EBC Brakes Yellowstu

Disc Brake Pad Set

Disc Brake Pad

EBC Yellowstuff is an aramid fibre based brake compound with high brake effect form cold and is possibly one of the first ever compounds that can be used for STREET AND TRACK DRIVING. These pads do not require warm up but do get even stronger under the heat of hard driving. These are not a low dust pad and if your desire is for a low dust premium street use pad, you should consider EBC Redstuff.When considering full race use, Yellowstuff has been a strong favourite, having been used for two years in the Swedish Camaro Cup and at numerous other race events where a stock caliper system is fitted.It is also the choice of 90-percent of the Mazda MX5 Miata competitors in the UK race series and has an unblemished record as rotor friendly track pad for vehicles up to 2000 lbs weight or 200 BHP.In the USA the SCCA and NASA drivershave been testing Yellowstuff with feedback and good reports POURING in from a 543 test driver major market proving event with these groups. Read that figure again 543 test drivers.There is no guesswork here.

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

Yellowstuff Pad for Sedans or maxi brake compound for Truck and SUV Yellow pads are our highest friction range. These come in two compounds, one for Truck and SUV upgrade and one for Race and street fastest use on Sedans and Muscle cars

EBC Brakes Yellowstuff pads are high friction coefficient spirited street pads, track capable on import, European sport, and fast imports. For trucks and SUV vehicles Yellowstuff pads are great for towing/hauling as well as off-road use.

Yellowstuff Our Flagship range FRONT Disc Brake Pad Set FMSI D652

EBC 95-01 Ford Explorer 4.0 2WD Yellowstuff Front Brake Pads

98 thru 2001 MERCURY Mountaineer 4.0 4WD

96 thru 2001 MERCURY Mountaineer 5.0 4WD

98 thru 2001 MERCURY Mountaineer 4.0 2WD

Yellowstuff Street And Track Brake Pads;

96 thru 2001 MERCURY Mountaineer 5.0 2WD

DP41199R FRONT EBC Yellowstuff Pads

95 thru 2001 FORD Explorer 4.0 2WD

2001 thru 2002 FORD Ranger 4WD 2.3

95 thru 2001 FORD Explorer 4.0 4WD

95 thru 2001 FORD Explorer 5.0 2WD

95 thru 2001 FORD Explorer 5.0 4WD

2001 thru 2002 FORD Ranger 2WD 2.3

98 thru 2002 FORD Ranger 4WD 4.0

98 thru 2002 FORD Ranger 2WD 2.5

98 thru 2002 FORD Ranger 2WD 4.0

98 thru 2002 FORD Ranger 4WD 3.0

98 thru 2002 FORD Ranger 4WD 2.5

98 thru 2002 FORD Ranger 2WD 3.0

95 thru 98 FORD Ranger 2WD 4.0

95 thru 98 FORD Ranger 4WD 2.3

95 thru 98 FORD Ranger 4WD 3.0

95 thru 98 FORD Ranger 4WD 4.0

95 thru 98 FORD Ranger 2WD 2.3

95 thru 98 FORD Ranger 2WD 3.0

2001 thru 2002 MAZDA B2300

98 thru 2001 MAZDA B2500

95 thru 2002 MAZDA B3000

95 thru 2002 MAZDA B4000

95 thru 97 MAZDA B2300

EBC YELLOWSTUFF PADS

EBC Brakes Yellowstu

Disc Brake Pad Set

Disc Brake Pad

Write your own review
*
*
  • Bad
  • Excellent
*
*
*
*

Vehicle Fitment

Ford

    Ranger

      2002 Edge - 2002 XL - 2002 XLT - 2002 EV - 2002 Postal - 2001 Edge - 2001 XL - 2001 EV - 2001 XLT - 2000 XLT - 2000 XL - 2000 EV - 1999 XL - 1999 XLT - 1999 EV - 1998 Splash - 1998 XLT - 1998 XL - 1998 EV - 1997 Sport - 1997 STX - 1997 XL - 1997 Splash - 1997 XLT - 1996 STX - 1996 Splash - 1996 XLT - 1996 XL - 1995 XL Sport - 1995 XLT - 1995 XL - 1995 Splash - 1995 STX

    Explorer

      2001 XLT - 2001 Eddie Bauer - 2001 Limited - 2001 Postal - 2001 XL Fleet - 2001 XLS - 2000 XLT - 2000 XLS - 2000 XL Fleet - 2000 Sport - 2000 Postal - 2000 Limited - 2000 Eddie Bauer - 1999 Limited - 1999 XLT - 1999 Eddie Bauer - 1999 Sport - 1999 XL - 1999 XLS - 1998 XLT - 1998 XL - 1998 Limited - 1998 Sport - 1998 Eddie Bauer - 1997 XLT - 1997 Eddie Bauer - 1997 Limited - 1997 Sport - 1997 XL - 1996 XLT - 1996 Sport - 1996 XL - 1996 Limited - 1996 Eddie Bauer - 1995 Eddie Bauer - 1995 Expedition - 1995 Limited - 1995 Sport - 1995 XL - 1995 XLT

Mazda

    B2300

      2002 Base - 2001 SE - 2001 SX - 1997 Base - 1997 SE - 1996 Base - 1996 SE - 1995 Base - 1995 SE

    B3000

      2002 DS - 2002 Base - 2001 DS - 2001 SE - 2000 SE - 2000 SX - 2000 Troy Lee - 1999 SE - 1999 Troy Lee - 1998 SE - 1998 SX - 1996 Base - 1996 SE - 1995 SE - 1995 Base

    B4000

      2002 Base - 2002 DS - 2001 DS - 2001 SE - 2000 SE - 2000 Troy Lee - 1999 SE - 1998 SE - 1997 Base - 1997 SE - 1996 SE - 1996 LE - 1995 SE - 1995 LE

    B2500

      2001 SE - 2001 SX - 2000 SE - 2000 SX - 1999 SE - 1999 SX - 1999 Troy Lee - 1998 SE - 1998 SX

Mercury

    Mountaineer

      2001 Base - 2000 Base - 1999 Base - 1998 Base - 1997 Base
*we take fitment seriously and have invested heavily into matching products to your vehicle, but it is up to the end user to confirm products are suitable for their vehicle, legal for them to use for the purposes they intend, and verify fitment upon installation. Many opened products may not be returned, so if fitment is in question, please contact us before ordering. We are not resonsible for any costs incurring from a product not being suitable to an end users application.