Search
Filters
Close

EBC 91-97 Infiniti G20 2-0 Yellowstuff Front Brake Pads - ( EBC DP4792R )

Availability: 15 in stock
SKU: DP4792R
Manufacturer: EBC
Old price: $173.33
$164.66
Supported payment types:
VISA Accepted VISA Accepted VISA Accepted VISA Accepted VISA Accepted VISA Accepted Paypal Accepted AFFIRM Accepted

OR - Express Checkout

EBC Yellowstuff is an aramid fibre based brake compound with high brake effect form cold and is possibly one of the first ever compounds that can be used for STREET AND TRACK DRIVING. These pads do not require warm up but do get even stronger under the heat of hard driving. These are not a low dust pad and if your desire is for a low dust premium street use pad, you should consider EBC Redstuff.When considering full race use, Yellowstuff has been a strong favourite, having been used for two years in the Swedish Camaro Cup and at numerous other race events where a stock caliper system is fitted.It is also the choice of 90-percent of the Mazda MX5 Miata competitors in the UK race series and has an unblemished record as rotor friendly track pad for vehicles up to 2000 lbs weight or 200 BHP.In the USA the SCCA and NASA drivershave been testing Yellowstuff with feedback and good reports POURING in from a 543 test driver major market proving event with these groups. Read that figure again 543 test drivers.There is no guesswork here.

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

Yellowstuff Pad for Sedans or maxi brake compound for Truck and SUV Yellow pads are our highest friction range. These come in two compounds, one for Truck and SUV upgrade and one for Race and street fastest use on Sedans and Muscle cars

EBC Brakes Yellowstuff pads are high friction coefficient spirited street pads, track capable on import, European sport, and fast imports. For trucks and SUV vehicles Yellowstuff pads are great for towing/hauling as well as off-road use.

Yellowstuff Our Flagship range FRONT Disc Brake Pad Set FMSI D462

EBC 91-97 Infiniti G20 2.0 Yellowstuff Front Brake Pads

96 thru 98 NISSAN 240SX 2.4 (ABS) (5 Lug)

Yellowstuff Street And Track Brake Pads;

89 thru 94 NISSAN Skyline (R32) 2.0 GTE

93 thru 98 NISSAN Skyline (R33) 2.0 GTS

93 thru 98 NISSAN Skyline (R33) 2.0

DP4792R FRONT EBC Yellowstuff Pads

89 thru 93 NISSAN 240SX 2.4 (ABS)

2000 thru 2006 NISSAN Sentra 1.8

90 thru 93 NISSAN Stanza 2.4

91 thru 97 INFINITI G20 2.0

97 thru 98 NISSAN 240SX 2.4

EBC YELLOWSTUFF PADS

EBC Brakes Yellowstu

Disc Brake Pad Set

Disc Brake Pad

EBC Yellowstuff is an aramid fibre based brake compound with high brake effect form cold and is possibly one of the first ever compounds that can be used for STREET AND TRACK DRIVING. These pads do not require warm up but do get even stronger under the heat of hard driving. These are not a low dust pad and if your desire is for a low dust premium street use pad, you should consider EBC Redstuff.When considering full race use, Yellowstuff has been a strong favourite, having been used for two years in the Swedish Camaro Cup and at numerous other race events where a stock caliper system is fitted.It is also the choice of 90-percent of the Mazda MX5 Miata competitors in the UK race series and has an unblemished record as rotor friendly track pad for vehicles up to 2000 lbs weight or 200 BHP.In the USA the SCCA and NASA drivershave been testing Yellowstuff with feedback and good reports POURING in from a 543 test driver major market proving event with these groups. Read that figure again 543 test drivers.There is no guesswork here.

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

Yellowstuff Pad for Sedans or maxi brake compound for Truck and SUV Yellow pads are our highest friction range. These come in two compounds, one for Truck and SUV upgrade and one for Race and street fastest use on Sedans and Muscle cars

EBC Brakes Yellowstuff pads are high friction coefficient spirited street pads, track capable on import, European sport, and fast imports. For trucks and SUV vehicles Yellowstuff pads are great for towing/hauling as well as off-road use.

Yellowstuff Our Flagship range FRONT Disc Brake Pad Set FMSI D462

EBC 91-97 Infiniti G20 2.0 Yellowstuff Front Brake Pads

96 thru 98 NISSAN 240SX 2.4 (ABS) (5 Lug)

Yellowstuff Street And Track Brake Pads;

89 thru 94 NISSAN Skyline (R32) 2.0 GTE

93 thru 98 NISSAN Skyline (R33) 2.0 GTS

93 thru 98 NISSAN Skyline (R33) 2.0

DP4792R FRONT EBC Yellowstuff Pads

89 thru 93 NISSAN 240SX 2.4 (ABS)

2000 thru 2006 NISSAN Sentra 1.8

90 thru 93 NISSAN Stanza 2.4

91 thru 97 INFINITI G20 2.0

97 thru 98 NISSAN 240SX 2.4

EBC YELLOWSTUFF PADS

EBC Brakes Yellowstu

Disc Brake Pad Set

Disc Brake Pad

Write your own review
*
*
  • Bad
  • Excellent
*
*
*
*

Vehicle Fitment

Nissan

    Sentra

      2006 Base - 2006 S - 2006 SE-R - 2006 SE-R Spec V - 2005 Base - 2005 S - 2005 SE-R - 2005 SE-R Spec V - 2004 Base - 2004 S - 2004 SE-R - 2004 SE-R Spec V - 2003 GXE - 2003 Limited Edition - 2003 SE-R - 2003 SE-R Spec V - 2003 XE - 2002 CA - 2002 GXE - 2002 SE-R - 2002 SE-R Spec V - 2002 XE - 2001 CA - 2001 GXE - 2001 SE - 2001 XE - 2000 GXE - 2000 SE - 2000 XE

    240SX

      1998 Base - 1998 LE - 1998 SE - 1997 Base - 1997 LE - 1997 SE - 1996 Base - 1996 SE - 1993 Base - 1993 SE - 1992 Base - 1992 LE - 1992 SE - 1991 Base - 1991 LE - 1991 SE - 1990 SE - 1990 XE - 1989 SE - 1989 XE

    Stanza

      1992 GXE - 1992 SE - 1992 XE - 1991 GXE - 1991 XE - 1990 GXE - 1990 XE

INFINITI

    G20

      1996 Base - 1996 T - 1995 Base - 1995 T - 1994 T - 1994 Base - 1993 Base - 1992 Base - 1991 Base
*we take fitment seriously and have invested heavily into matching products to your vehicle, but it is up to the end user to confirm products are suitable for their vehicle, legal for them to use for the purposes they intend, and verify fitment upon installation. Many opened products may not be returned, so if fitment is in question, please contact us before ordering. We are not resonsible for any costs incurring from a product not being suitable to an end users application.