Search
Filters
Close

EBC 91-95 Buick Skylark 2-3 Redstuff Front Brake Pads - ( EBC DP31174C )

Availability: 26 in stock
SKU: DP31174C
Manufacturer: EBC
Old price: $147.04
$139.69
Supported payment types:
VISA Accepted VISA Accepted VISA Accepted VISA Accepted VISA Accepted VISA Accepted Paypal Accepted AFFIRM Accepted

OR - Express Checkout

There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

Low dust EBC Redstuff is a superb pad for fast street use and targets high HP imports, muscle cars and prestige European cars. EBC Redstuff ceramic pads reduce dust emitted by OEM pads by approx 80 percent.

Front Redstuff 3000 series Red Ceramic Pads are for the fastest street use or Premium sedan fitment. Both Red Ceramic and 7000 SUV pads are our lowest dust ranges

Greenstuff 7000 & Redstuff Premium Street FRONT Disc Brake Pad Set FMSI D506

1990 OLDSMOBILE Cutlass Calais 2.3 Performance Package

1990 OLDSMOBILE Cutlass Calais 2.5 Performance Package

1990 OLDSMOBILE Cutlass Calais 3.3 Performance Package

EBC 91-95 Buick Skylark 2.3 Redstuff Front Brake Pads

EBC Redstuff Ceramic Low Dust Brake Pads;

1991 OLDSMOBILE Cutlass Calais 3.3

1991 OLDSMOBILE Cutlass Calais 2.3

1991 OLDSMOBILE Cutlass Calais 2.5

94 thru 95 CHEVROLET Cavalier 2.3

92 thru 95 CHEVROLET Cavalier 3.1

92 thru 95 OLDSMOBILE Achieva 2.3

94 thru 95 OLDSMOBILE Achieva 3.1

92 thru 94 OLDSMOBILE Achieva 3.3

92 thru 95 CHEVROLET Cavalier 2.2

92 thru 95 CHEVROLET Beretta 3.1

92 thru 94 CHEVROLET Beretta 2.3

92 thru 95 CHEVROLET Corsica 3.1

92 thru 95 CHEVROLET Beretta 2.2

92 thru 95 CHEVROLET Corsica 2.2

DP31174C FRONT EBC Redstuff Pads

91 thru 95 PONTIAC Grand-Am 2.3

91 thru 92 PONTIAC Grand-Am 2.5

94 thru 95 PONTIAC Grand-Am 3.1

92 thru 94 PONTIAC Grand-Am 3.3

92 thru 94 PONTIAC Sunbird 2.0

92 thru 94 PONTIAC Sunbird 3.1

91 thru 93 BUICK Skylark 3.3

91 thru 92 BUICK Skylark 2.5

94 thru 95 BUICK Skylark 3.1

91 thru 95 BUICK Skylark 2.3

EBC REDSTUFF CERAMIC PADS

1995 PONTIAC Sunfire 2.2

1995 PONTIAC Sunfire 2.3

EBC REDSTUFF PADS (MM)

EBC Brakes Redstuff

Disc Brake Pad Set

EBC Redstuff Pads

Disc Brake Pad

There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

Low dust EBC Redstuff is a superb pad for fast street use and targets high HP imports, muscle cars and prestige European cars. EBC Redstuff ceramic pads reduce dust emitted by OEM pads by approx 80 percent.

Front Redstuff 3000 series Red Ceramic Pads are for the fastest street use or Premium sedan fitment. Both Red Ceramic and 7000 SUV pads are our lowest dust ranges

Greenstuff 7000 & Redstuff Premium Street FRONT Disc Brake Pad Set FMSI D506

1990 OLDSMOBILE Cutlass Calais 2.3 Performance Package

1990 OLDSMOBILE Cutlass Calais 2.5 Performance Package

1990 OLDSMOBILE Cutlass Calais 3.3 Performance Package

EBC 91-95 Buick Skylark 2.3 Redstuff Front Brake Pads

EBC Redstuff Ceramic Low Dust Brake Pads;

1991 OLDSMOBILE Cutlass Calais 3.3

1991 OLDSMOBILE Cutlass Calais 2.3

1991 OLDSMOBILE Cutlass Calais 2.5

94 thru 95 CHEVROLET Cavalier 2.3

92 thru 95 CHEVROLET Cavalier 3.1

92 thru 95 OLDSMOBILE Achieva 2.3

94 thru 95 OLDSMOBILE Achieva 3.1

92 thru 94 OLDSMOBILE Achieva 3.3

92 thru 95 CHEVROLET Cavalier 2.2

92 thru 95 CHEVROLET Beretta 3.1

92 thru 94 CHEVROLET Beretta 2.3

92 thru 95 CHEVROLET Corsica 3.1

92 thru 95 CHEVROLET Beretta 2.2

92 thru 95 CHEVROLET Corsica 2.2

DP31174C FRONT EBC Redstuff Pads

91 thru 95 PONTIAC Grand-Am 2.3

91 thru 92 PONTIAC Grand-Am 2.5

94 thru 95 PONTIAC Grand-Am 3.1

92 thru 94 PONTIAC Grand-Am 3.3

92 thru 94 PONTIAC Sunbird 2.0

92 thru 94 PONTIAC Sunbird 3.1

91 thru 93 BUICK Skylark 3.3

91 thru 92 BUICK Skylark 2.5

94 thru 95 BUICK Skylark 3.1

91 thru 95 BUICK Skylark 2.3

EBC REDSTUFF CERAMIC PADS

1995 PONTIAC Sunfire 2.2

1995 PONTIAC Sunfire 2.3

EBC REDSTUFF PADS (MM)

EBC Brakes Redstuff

Disc Brake Pad Set

EBC Redstuff Pads

Disc Brake Pad

Write your own review
*
*
  • Bad
  • Excellent
*
*
*
*

Vehicle Fitment

Buick

    Skylark

      1995 Custom - 1995 Gran Sport - 1995 Limited - 1994 Limited - 1994 Gran Sport - 1994 Custom - 1993 Custom - 1993 Gran Sport - 1993 Limited - 1992 Custom - 1992 Gran Sport - 1991 Luxury Edition - 1991 Gran Sport - 1991 Custom - 1991 Base

Chevrolet

    Beretta

      1995 Base - 1995 Z26 - 1994 Base - 1994 Z26 - 1993 GTZ - 1993 GT - 1993 Base - 1992 Base - 1992 GT - 1992 GTZ

    Cavalier

      1995 Base - 1995 LS - 1995 Z24 - 1994 RS - 1994 VL - 1994 Z24 - 1993 RS - 1993 VL - 1993 Z24 - 1992 VL - 1992 RS - 1992 Z24

    Corsica

      1995 Base - 1994 Base - 1993 LT - 1992 LT - 1992 LTZ

Oldsmobile

    Achieva

      1995 S - 1995 SL - 1994 SL - 1994 S - 1994 SC - 1993 S - 1993 SL - 1993 SCX - 1992 S - 1992 SL - 1992 SC - 1992 SCX

    Cutlass Calais

      1991 S - 1991 SL - 1991 Base - 1991 GT - 1991 International - 1990 SL - 1990 S - 1990 International - 1990 GT - 1990 Base

Pontiac

    Grand Am

      1995 GT - 1995 SE - 1994 GT - 1994 SE - 1993 SE - 1993 GT - 1992 SE - 1992 GT - 1991 Value Leader - 1991 LE - 1991 SE

    Sunfire

      1995 GT - 1995 SE

    Sunbird

      1994 LE - 1994 GT - 1994 SE - 1993 GT - 1993 LE Value Leader - 1993 SE - 1992 LE Value Leader - 1992 GT - 1992 SE
*we take fitment seriously and have invested heavily into matching products to your vehicle, but it is up to the end user to confirm products are suitable for their vehicle, legal for them to use for the purposes they intend, and verify fitment upon installation. Many opened products may not be returned, so if fitment is in question, please contact us before ordering. We are not resonsible for any costs incurring from a product not being suitable to an end users application.