Search
Filters
Close

EBC 84-87 Honda Civic CRX 1-5 DX Yellowstuff Front Brake Pads - ( EBC DP4570R )

Availability: 25 in stock
SKU: DP4570R
Manufacturer: EBC
Old price: $146.78
$139.44
Supported payment types:
VISA Accepted VISA Accepted VISA Accepted VISA Accepted VISA Accepted VISA Accepted Paypal Accepted AFFIRM Accepted

OR - Express Checkout

EBC Yellowstuff is an aramid fibre based brake compound with high brake effect form cold and is possibly one of the first ever compounds that can be used for STREET AND TRACK DRIVING. These pads do not require warm up but do get even stronger under the heat of hard driving. These are not a low dust pad and if your desire is for a low dust premium street use pad, you should consider EBC Redstuff.When considering full race use, Yellowstuff has been a strong favourite, having been used for two years in the Swedish Camaro Cup and at numerous other race events where a stock caliper system is fitted.It is also the choice of 90-percent of the Mazda MX5 Miata competitors in the UK race series and has an unblemished record as rotor friendly track pad for vehicles up to 2000 lbs weight or 200 BHP.In the USA the SCCA and NASA drivershave been testing Yellowstuff with feedback and good reports POURING in from a 543 test driver major market proving event with these groups. Read that figure again 543 test drivers.There is no guesswork here.

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

Yellowstuff Pad for Sedans or maxi brake compound for Truck and SUV Yellow pads are our highest friction range. These come in two compounds, one for Truck and SUV upgrade and one for Race and street fastest use on Sedans and Muscle cars

EBC Brakes Yellowstuff pads are high friction coefficient spirited street pads, track capable on import, European sport, and fast imports. For trucks and SUV vehicles Yellowstuff pads are great for towing/hauling as well as off-road use.

Yellowstuff Our Flagship range FRONT Disc Brake Pad Set FMSI D256

EBC 84-87 Honda Civic CRX 1.5 DX Yellowstuff Front Brake Pads

2000 thru 2006 HONDA Insight 1.0 hybrid (CVT Auto)

Yellowstuff Street And Track Brake Pads;

85 thru 87 HONDA Civic Wagon 4wd 1.6

85 thru 87 HONDA Civic Wagon 4wd 1.5

84 thru 87 HONDA Civic Wagon 2wd 1.5

DP4570R FRONT EBC Yellowstuff Pads

84 thru 87 HONDA Civic CRX 1.5 DX

88 thru 91 HONDA Civic CRX 1.5 HF

84 thru 87 HONDA Civic CRX 1.6

EBC YELLOWSTUFF PADS (MM)

EBC YELLOWSTUFF PADS

EBC Brakes Yellowstu

Disc Brake Pad Set

Disc Brake Pad

EBC Yellowstuff is an aramid fibre based brake compound with high brake effect form cold and is possibly one of the first ever compounds that can be used for STREET AND TRACK DRIVING. These pads do not require warm up but do get even stronger under the heat of hard driving. These are not a low dust pad and if your desire is for a low dust premium street use pad, you should consider EBC Redstuff.When considering full race use, Yellowstuff has been a strong favourite, having been used for two years in the Swedish Camaro Cup and at numerous other race events where a stock caliper system is fitted.It is also the choice of 90-percent of the Mazda MX5 Miata competitors in the UK race series and has an unblemished record as rotor friendly track pad for vehicles up to 2000 lbs weight or 200 BHP.In the USA the SCCA and NASA drivershave been testing Yellowstuff with feedback and good reports POURING in from a 543 test driver major market proving event with these groups. Read that figure again 543 test drivers.There is no guesswork here.

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

Yellowstuff Pad for Sedans or maxi brake compound for Truck and SUV Yellow pads are our highest friction range. These come in two compounds, one for Truck and SUV upgrade and one for Race and street fastest use on Sedans and Muscle cars

EBC Brakes Yellowstuff pads are high friction coefficient spirited street pads, track capable on import, European sport, and fast imports. For trucks and SUV vehicles Yellowstuff pads are great for towing/hauling as well as off-road use.

Yellowstuff Our Flagship range FRONT Disc Brake Pad Set FMSI D256

EBC 84-87 Honda Civic CRX 1.5 DX Yellowstuff Front Brake Pads

2000 thru 2006 HONDA Insight 1.0 hybrid (CVT Auto)

Yellowstuff Street And Track Brake Pads;

85 thru 87 HONDA Civic Wagon 4wd 1.6

85 thru 87 HONDA Civic Wagon 4wd 1.5

84 thru 87 HONDA Civic Wagon 2wd 1.5

DP4570R FRONT EBC Yellowstuff Pads

84 thru 87 HONDA Civic CRX 1.5 DX

88 thru 91 HONDA Civic CRX 1.5 HF

84 thru 87 HONDA Civic CRX 1.6

EBC YELLOWSTUFF PADS (MM)

EBC YELLOWSTUFF PADS

EBC Brakes Yellowstu

Disc Brake Pad Set

Disc Brake Pad

Write your own review
*
*
  • Bad
  • Excellent
*
*
*
*

Vehicle Fitment

Honda

    Insight

      2006 Base - 2005 Base - 2004 Base - 2003 Base - 2002 Base - 2001 Base - 2000 Base

    Civic

      1991 Base - 1991 DX - 1991 Si - 1991 EX - 1991 LX - 1991 RT 4WD - 1990 Base - 1990 DX - 1990 Si - 1990 EX - 1990 LX - 1990 RT 4WD - 1989 Base - 1989 DX - 1989 Si - 1989 LX - 1989 RT 4WD - 1989 Wagovan - 1988 Base - 1988 DX - 1988 LX - 1988 Wagovan - 1988 RT 4WD - 1987 Base - 1987 DX - 1987 Si - 1987 CRX - 1987 CRX HF - 1987 CRX Si - 1986 Base - 1986 DX - 1986 Si - 1986 CRX - 1986 CRX HF - 1986 CRX Si - 1985 CRX - 1985 CRX HF - 1985 CRX Si - 1985 Base - 1985 DX - 1985 1500 S - 1984 Base - 1984 DX - 1984 1500 S - 1984 CRX - 1984 CRX 1.5

    CRX

      1991 HF - 1990 HF - 1989 HF - 1988 HF
*we take fitment seriously and have invested heavily into matching products to your vehicle, but it is up to the end user to confirm products are suitable for their vehicle, legal for them to use for the purposes they intend, and verify fitment upon installation. Many opened products may not be returned, so if fitment is in question, please contact us before ordering. We are not resonsible for any costs incurring from a product not being suitable to an end users application.