Search
Filters
Close

EBC 83-86 Toyota Camry 2-0 Redstuff Front Brake Pads - ( EBC DP3453C )

Availability: 9 in stock
SKU: DP3453C
Manufacturer: EBC
Old price: $165.49
$157.22
Supported payment types:
VISA Accepted VISA Accepted VISA Accepted VISA Accepted VISA Accepted VISA Accepted Paypal Accepted AFFIRM Accepted

OR - Express Checkout

There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

Low dust EBC Redstuff is a superb pad for fast street use and targets high HP imports, muscle cars and prestige European cars. EBC Redstuff ceramic pads reduce dust emitted by OEM pads by approx 80 percent.

Front Redstuff 3000 series Red Ceramic Pads are for the fastest street use or Premium sedan fitment. Both Red Ceramic and 7000 SUV pads are our lowest dust ranges

Greenstuff 7000 & Redstuff Premium Street FRONT Disc Brake Pad Set FMSI D242

EBC 83-86 Toyota Camry 2.0 Redstuff Front Brake Pads

EBC Redstuff Ceramic Low Dust Brake Pads;

88 thru 89 TOYOTA Corolla GTS 1.6

90 thru 91 TOYOTA Corolla GTS 1.6

DP3453C FRONT EBC Redstuff Pads

83 thru 86 TOYOTA Camry 1.8 TD

83 thru 86 TOYOTA Camry 2.0 TD

88 thru 92 TOYOTA Corolla 1.6

83 thru 98 TOYOTA Tercel 1.5

90 thru 91 TOYOTA Celica 1.6

86 thru 91 TOYOTA Celica 2.0

83 thru 86 TOYOTA Camry 2.0

92 thru 99 TOYOTA Paseo 1.5

EBC REDSTUFF CERAMIC PADS

85 thru 90 TOYOTA MR2 1.6

91 thru 95 TOYOTA MR2 2.2

EBC Brakes Redstuff

Disc Brake Pad Set

EBC REDSTUFF PADS

Disc Brake Pad

There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

Low dust EBC Redstuff is a superb pad for fast street use and targets high HP imports, muscle cars and prestige European cars. EBC Redstuff ceramic pads reduce dust emitted by OEM pads by approx 80 percent.

Front Redstuff 3000 series Red Ceramic Pads are for the fastest street use or Premium sedan fitment. Both Red Ceramic and 7000 SUV pads are our lowest dust ranges

Greenstuff 7000 & Redstuff Premium Street FRONT Disc Brake Pad Set FMSI D242

EBC 83-86 Toyota Camry 2.0 Redstuff Front Brake Pads

EBC Redstuff Ceramic Low Dust Brake Pads;

88 thru 89 TOYOTA Corolla GTS 1.6

90 thru 91 TOYOTA Corolla GTS 1.6

DP3453C FRONT EBC Redstuff Pads

83 thru 86 TOYOTA Camry 1.8 TD

83 thru 86 TOYOTA Camry 2.0 TD

88 thru 92 TOYOTA Corolla 1.6

83 thru 98 TOYOTA Tercel 1.5

90 thru 91 TOYOTA Celica 1.6

86 thru 91 TOYOTA Celica 2.0

83 thru 86 TOYOTA Camry 2.0

92 thru 99 TOYOTA Paseo 1.5

EBC REDSTUFF CERAMIC PADS

85 thru 90 TOYOTA MR2 1.6

91 thru 95 TOYOTA MR2 2.2

EBC Brakes Redstuff

Disc Brake Pad Set

EBC REDSTUFF PADS

Disc Brake Pad

Write your own review
*
*
  • Bad
  • Excellent
*
*
*
*

Vehicle Fitment

Toyota

    Paseo

      1998 Base - 1998 Convertible - 1997 Base - 1997 Convertible - 1996 Base - 1995 Base - 1994 Base - 1993 Base - 1992 Base

    Tercel

      1998 CE - 1997 CE - 1996 DX - 1996 STD - 1995 STD - 1995 DX - 1994 DLX - 1994 STD - 1994 LE - 1993 STD - 1993 DLX - 1993 LE - 1992 DLX - 1992 LE - 1992 STD - 1991 STD - 1991 DLX - 1991 LE - 1990 Base - 1990 DX - 1990 EZ - 1990 STD - 1989 Base - 1989 DX - 1989 STD - 1989 EZ - 1988 DX - 1988 STD - 1988 DLX - 1988 EZ - 1988 SR5 - 1987 DX - 1987 STD - 1987 DLX - 1987 SR5 - 1986 STD - 1986 DLX - 1986 SR5 - 1985 STD - 1985 DLX - 1985 SR5 - 1984 STD - 1984 DLX - 1984 SR5 - 1983 STD - 1983 DLX - 1983 SR5

    MR2

      1995 Base - 1995 Turbo - 1994 Base - 1994 Turbo - 1993 Base - 1993 Turbo - 1992 Base - 1992 Turbo - 1991 Base - 1991 Turbo - 1989 GT - 1989 Super Charged - 1988 Super Charged - 1988 GT - 1987 GT - 1986 GT - 1985 GT

    Corolla

      1992 Base - 1992 DLX - 1992 DLX All Trac - 1992 LE - 1991 Base - 1991 DLX - 1991 DLX All Trac - 1991 GTS - 1991 LE - 1991 SR5 - 1990 Base - 1990 DLX - 1990 DLX All Trac - 1990 GTS - 1990 LE - 1990 SR5 - 1990 SR5 All Trac - 1989 DLX - 1989 DLX All Trac - 1989 GTS - 1989 LE - 1989 SR5 - 1989 SR5 All Trac - 1988 DLX - 1988 DLX All Trac - 1988 FX - 1988 FX16 - 1988 FX16 GTS - 1988 GTS - 1988 LE - 1988 SR5 - 1988 SR5 All Trac - 1987 DLX - 1987 FX - 1987 FX16 - 1987 FX16 GTS - 1987 LE - 1987 Sport GTS - 1987 Sport SR5 - 1987 Sport DLX - 1986 LE Limited - 1986 LE - 1986 DLX - 1986 Sport DLX - 1986 Sport GTS - 1986 Sport SR5

    Celica

      1991 All Trac - 1991 GT - 1991 GTS - 1991 ST - 1990 All Trac - 1990 GT - 1990 GTS - 1990 ST - 1989 All Trac - 1989 GT - 1989 GTS - 1989 ST - 1988 All Trac - 1988 GT - 1988 GTS - 1988 ST - 1987 GT - 1987 GTS - 1987 ST - 1986 GT - 1986 GTS - 1986 ST - 1986 Supra

    Camry

      1986 DLX - 1986 LE - 1985 DLX - 1985 LE - 1984 DLX - 1984 LE - 1983 DLX - 1983 LE
*we take fitment seriously and have invested heavily into matching products to your vehicle, but it is up to the end user to confirm products are suitable for their vehicle, legal for them to use for the purposes they intend, and verify fitment upon installation. Many opened products may not be returned, so if fitment is in question, please contact us before ordering. We are not resonsible for any costs incurring from a product not being suitable to an end users application.