Search
Filters
Close

EBC 13+ Ford Fiesta 1-6 Turbo ST Redstuff Rear Brake Pads - ( EBC DP31218C )

Availability: 74 in stock
SKU: DP31218C
Manufacturer: EBC
Old price: $123.77
$117.58
Supported payment types:
VISA Accepted VISA Accepted VISA Accepted VISA Accepted VISA Accepted VISA Accepted Paypal Accepted AFFIRM Accepted

OR - Express Checkout

There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

Low dust EBC Redstuff is a superb pad for fast street use and targets high HP imports, muscle cars and prestige European cars. EBC Redstuff ceramic pads reduce dust emitted by OEM pads by approx 80 percent.

Rear Redstuff 3000 series Red Ceramic Pads are for the fastest street use or Premium sedan fitment. Both Red Ceramic and 7000 SUV pads are our lowest dust ranges

EBC 13+ Ford Fiesta 1.6 Turbo ST Redstuff Rear Brake Pads

Redstuff Premium Street REAR Disc Brake Pad Set FMSI D886

EBC Redstuff Ceramic Low Dust Brake Pads;

2013 and up FORD Fiesta 1.6 Turbo ST

2002 thru 2004 FORD Focus 2.0 SVT

DP31218C REAR EBC Redstuff Pads

2005 thru 2007 FORD Focus 2.3

2000 thru 2004 FORD Focus 2.0

2003 thru 2004 FORD Focus 2.3

EBC REDSTUFF CERAMIC PADS

EBC Brakes Redstuff

Disc Brake Pad Set

EBC REDSTUFF PADS

Disc Brake Pad

There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

Low dust EBC Redstuff is a superb pad for fast street use and targets high HP imports, muscle cars and prestige European cars. EBC Redstuff ceramic pads reduce dust emitted by OEM pads by approx 80 percent.

Rear Redstuff 3000 series Red Ceramic Pads are for the fastest street use or Premium sedan fitment. Both Red Ceramic and 7000 SUV pads are our lowest dust ranges

EBC 13+ Ford Fiesta 1.6 Turbo ST Redstuff Rear Brake Pads

Redstuff Premium Street REAR Disc Brake Pad Set FMSI D886

EBC Redstuff Ceramic Low Dust Brake Pads;

2013 and up FORD Fiesta 1.6 Turbo ST

2002 thru 2004 FORD Focus 2.0 SVT

DP31218C REAR EBC Redstuff Pads

2005 thru 2007 FORD Focus 2.3

2000 thru 2004 FORD Focus 2.0

2003 thru 2004 FORD Focus 2.3

EBC REDSTUFF CERAMIC PADS

EBC Brakes Redstuff

Disc Brake Pad Set

EBC REDSTUFF PADS

Disc Brake Pad

Write your own review
*
*
  • Bad
  • Excellent
*
*
*
*

Vehicle Fitment

Ford

    Fiesta

      2019 S - 2019 SE - 2019 ST - 2019 ST Line - 2018 S - 2018 SE - 2018 ST - 2018 Titanium - 2017 S - 2017 SE - 2017 ST - 2017 Titanium - 2016 S - 2016 SE - 2016 ST - 2016 Titanium - 2015 S - 2015 SE - 2015 ST - 2015 Titanium - 2014 ST - 2014 Titanium - 2014 S - 2014 SE - 2013 S - 2013 SE - 2013 Titanium

    Focus

      2007 S - 2007 SE - 2007 SES - 2007 ST - 2006 ZX3 - 2006 ZX4 - 2006 ZX4 ST - 2006 ZX5 - 2006 ZXW - 2005 ZX3 - 2005 ZX5 - 2005 ZXW - 2005 ZX4 ST - 2005 ZX4 - 2004 LX - 2004 SE - 2004 SVT - 2004 ZTS - 2004 ZTW - 2004 ZX3 - 2004 ZX5 - 2003 ZTW - 2003 LX - 2003 SE - 2003 SVT - 2003 ZTS - 2003 ZX3 - 2003 ZX5 - 2002 ZX5 - 2002 ZTW - 2002 ZTS - 2002 SVT - 2002 SE - 2002 LX - 2002 ZX3 - 2001 ZX3 - 2001 LX - 2001 SE - 2001 ZTS - 2000 ZTS - 2000 SE - 2000 Sony Limited Edition - 2000 LX - 2000 ZX3
*we take fitment seriously and have invested heavily into matching products to your vehicle, but it is up to the end user to confirm products are suitable for their vehicle, legal for them to use for the purposes they intend, and verify fitment upon installation. Many opened products may not be returned, so if fitment is in question, please contact us before ordering. We are not resonsible for any costs incurring from a product not being suitable to an end users application.