Search
Filters
Close

EBC 13-14 Chrysler 200 3-6 Redstuff Front Brake Pads - ( EBC DP31724C )

Availability: 39 in stock
SKU: DP31724C
Manufacturer: EBC
Old price: $211.51
$200.93
Supported payment types:
VISA Accepted VISA Accepted VISA Accepted VISA Accepted VISA Accepted VISA Accepted Paypal Accepted AFFIRM Accepted

OR - Express Checkout

There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

Low dust EBC Redstuff is a superb pad for fast street use and targets high HP imports, muscle cars and prestige European cars. EBC Redstuff ceramic pads reduce dust emitted by OEM pads by approx 80 percent.

Front Redstuff 3000 series Red Ceramic Pads are for the fastest street use or Premium sedan fitment. Both Red Ceramic and 7000 SUV pads are our lowest dust ranges

Greenstuff 7000 & Redstuff Premium Street FRONT Disc Brake Pad Set FMSI D1058

2009 thru 2010 DODGE Challenger 3.5 SXT (Vented rear rotors)

2006 thru 2010 DODGE Charger 3.5 SXT (Vented rear rotors)

EBC Redstuff Ceramic Low Dust Brake Pads; 13.4 in. Dia.;

EBC 13-14 Chrysler 200 3.6 Redstuff Front Brake Pads

2006 thru 2011 DODGE Charger 5.7 Daytona R/T

2006 thru 2010 CHRYSLER 300 Touring 3.5 4WD

2008 thru 2010 DODGE Caliber 2.4 Turbo SRT4

2006 thru 2010 CHRYSLER 300 Limited 3.5 4WD

2011 DODGE Charger 3.6 (vented rear rotors)

2006 thru 2008 DODGE Magnum 3.5 (AWD)

2006 thru 2011 DODGE Charger 5.7 R/T

2009 thru 2011 DODGE Challenger 5.7

2004 thru 2008 DODGE Magnum 5.7 RT

DP31724C FRONT EBC Redstuff Pads

2005 thru 2010 CHRYSLER 300C 5.7

2013 thru 2014 DODGE Avenger 3.6

2013 thru 2014 CHRYSLER 200 3.6

EBC REDSTUFF CERAMIC PADS

EBC Brakes Redstuff

Disc Brake Pad Set

EBC REDSTUFF PADS

Disc Brake Pad

There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

Low dust EBC Redstuff is a superb pad for fast street use and targets high HP imports, muscle cars and prestige European cars. EBC Redstuff ceramic pads reduce dust emitted by OEM pads by approx 80 percent.

Front Redstuff 3000 series Red Ceramic Pads are for the fastest street use or Premium sedan fitment. Both Red Ceramic and 7000 SUV pads are our lowest dust ranges

Greenstuff 7000 & Redstuff Premium Street FRONT Disc Brake Pad Set FMSI D1058

2009 thru 2010 DODGE Challenger 3.5 SXT (Vented rear rotors)

2006 thru 2010 DODGE Charger 3.5 SXT (Vented rear rotors)

EBC Redstuff Ceramic Low Dust Brake Pads; 13.4 in. Dia.;

EBC 13-14 Chrysler 200 3.6 Redstuff Front Brake Pads

2006 thru 2011 DODGE Charger 5.7 Daytona R/T

2006 thru 2010 CHRYSLER 300 Touring 3.5 4WD

2008 thru 2010 DODGE Caliber 2.4 Turbo SRT4

2006 thru 2010 CHRYSLER 300 Limited 3.5 4WD

2011 DODGE Charger 3.6 (vented rear rotors)

2006 thru 2008 DODGE Magnum 3.5 (AWD)

2006 thru 2011 DODGE Charger 5.7 R/T

2009 thru 2011 DODGE Challenger 5.7

2004 thru 2008 DODGE Magnum 5.7 RT

DP31724C FRONT EBC Redstuff Pads

2005 thru 2010 CHRYSLER 300C 5.7

2013 thru 2014 DODGE Avenger 3.6

2013 thru 2014 CHRYSLER 200 3.6

EBC REDSTUFF CERAMIC PADS

EBC Brakes Redstuff

Disc Brake Pad Set

EBC REDSTUFF PADS

Disc Brake Pad

Write your own review
*
*
  • Bad
  • Excellent
*
*
*
*

Vehicle Fitment

Chrysler

    200

      2014 Limited - 2014 LX - 2014 S - 2014 Touring - 2013 S - 2013 Touring - 2013 Limited - 2013 LX

    300

      2010 S - 2010 C - 2010 Touring - 2010 Limited - 2010 C SRT8 - 2009 Signature Series - 2009 LX - 2009 C - 2009 Touring - 2009 Limited - 2009 C SRT8 - 2008 C SRT8 - 2008 LX - 2008 C - 2008 Touring - 2008 Limited - 2007 Base - 2007 C - 2007 Touring - 2007 Limited - 2007 C SRT8 - 2006 C SRT8 - 2006 C - 2006 Limited - 2006 Touring - 2006 Base - 2005 Base - 2005 Touring - 2005 Limited - 2005 C - 2005 C SRT8

Dodge

    Avenger

      2014 R/T - 2014 SE - 2014 SXT - 2013 R/T - 2013 SE - 2013 SXT

    Challenger

      2011 SE - 2011 R/T - 2011 SRT8 - 2010 SRT8 - 2010 SE - 2010 R/T - 2009 SRT8 - 2009 SE - 2009 R/T

    Charger

      2011 R/T - 2011 SE - 2011 Pursuit - 2010 R/T - 2010 SXT - 2010 SE - 2010 SRT8 - 2010 Pursuit - 2009 R/T - 2009 SXT - 2009 SE - 2009 SRT8 - 2009 Pursuit - 2008 SRT8 - 2008 R/T - 2008 SXT - 2008 SE - 2008 Pursuit - 2007 SRT8 - 2007 R/T - 2007 Base - 2007 SE - 2007 SXT - 2007 Pursuit - 2006 SE - 2006 SXT - 2006 R/T - 2006 Daytona R/T - 2006 SRT8 - 2006 Base - 2006 Pursuit

    Caliber

      2010 R/T - 2010 SE - 2010 SXT - 2010 Express - 2010 Mainstreet - 2010 Heat - 2010 Uptown - 2010 Rush - 2009 SXT - 2009 SE - 2009 R/T - 2009 SRT-4 - 2008 SXT - 2008 SE - 2008 R/T - 2008 SRT-4

    Magnum

      2008 SRT8 - 2008 R/T - 2008 SE - 2008 SXT - 2007 SXT - 2007 SE - 2007 R/T - 2007 SRT8 - 2006 SRT8 - 2006 R/T - 2006 SXT - 2006 SE - 2005 SXT Special Edition - 2005 SE - 2005 SXT - 2005 R/T
*we take fitment seriously and have invested heavily into matching products to your vehicle, but it is up to the end user to confirm products are suitable for their vehicle, legal for them to use for the purposes they intend, and verify fitment upon installation. Many opened products may not be returned, so if fitment is in question, please contact us before ordering. We are not resonsible for any costs incurring from a product not being suitable to an end users application.