Search
Filters
Close

EBC 12+ Acura RDX 3-5 Redstuff Front Brake Pads - ( EBC DP31896C )

Availability: 53 in stock
SKU: DP31896C
Manufacturer: EBC
Old price: $158.45
$150.53
Supported payment types:
VISA Accepted VISA Accepted VISA Accepted VISA Accepted VISA Accepted VISA Accepted Paypal Accepted AFFIRM Accepted

OR - Express Checkout

There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

Low dust EBC Redstuff is a superb pad for fast street use and targets high HP imports, muscle cars and prestige European cars. EBC Redstuff ceramic pads reduce dust emitted by OEM pads by approx 80 percent.

Front Redstuff 3000 series Red Ceramic Pads are for the fastest street use or Premium sedan fitment. Both Red Ceramic and 7000 SUV pads are our lowest dust ranges

Greenstuff 7000 & Redstuff Premium Street FRONT Disc Brake Pad Set FMSI D1625

EBC 12+ Acura RDX 3.5 Redstuff Front Brake Pads

EBC Redstuff Ceramic Low Dust Brake Pads;

DP31896C FRONT EBC Redstuff Pads

2012 thru 2018 ACURA RDX 3.5

EBC REDSTUFF CERAMIC PADS

2013 and up ACURA RLX 3.5

EBC Brakes Redstuff

Disc Brake Pad Set

EBC REDSTUFF PADS

Disc Brake Pad

There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

Low dust EBC Redstuff is a superb pad for fast street use and targets high HP imports, muscle cars and prestige European cars. EBC Redstuff ceramic pads reduce dust emitted by OEM pads by approx 80 percent.

Front Redstuff 3000 series Red Ceramic Pads are for the fastest street use or Premium sedan fitment. Both Red Ceramic and 7000 SUV pads are our lowest dust ranges

Greenstuff 7000 & Redstuff Premium Street FRONT Disc Brake Pad Set FMSI D1625

EBC 12+ Acura RDX 3.5 Redstuff Front Brake Pads

EBC Redstuff Ceramic Low Dust Brake Pads;

DP31896C FRONT EBC Redstuff Pads

2012 thru 2018 ACURA RDX 3.5

EBC REDSTUFF CERAMIC PADS

2013 and up ACURA RLX 3.5

EBC Brakes Redstuff

Disc Brake Pad Set

EBC REDSTUFF PADS

Disc Brake Pad

Write your own review
*
*
  • Bad
  • Excellent
*
*
*
*

Vehicle Fitment

Honda

    Civic

      2021 Type R Limited Edition - 2021 Touring - 2021 Sport Touring - 2021 Sport - 2021 LX - 2021 EX-L - 2021 EX - 2021 Type R - 2020 Touring - 2020 Si - 2020 Type R - 2020 Sport - 2020 Sport Touring - 2020 LX - 2020 EX-L - 2020 EX - 2019 EX - 2019 EX-L - 2019 LX - 2019 Si - 2019 Sport - 2019 Sport Touring - 2019 Touring - 2019 Type R - 2018 Type R - 2018 EX - 2018 EX-T - 2018 LX - 2018 LX-P - 2018 Sport - 2018 Touring - 2018 Si - 2018 EX-L - 2018 Sport Touring - 2017 EX - 2017 EX-L - 2017 LX - 2017 Sport - 2017 LX-P - 2017 EX-T - 2017 Touring - 2017 Si - 2017 Type R - 2017 Sport Touring - 2016 LX - 2016 EX-L - 2016 EX-T - 2016 Touring - 2016 EX - 2016 LX-P

Acura

    RLX

      2020 Sport Hybrid SH-AWD - 2020 Base - 2019 Sport Hybrid SH-AWD - 2019 Base - 2018 Base - 2018 Sport Hybrid SH-AWD - 2017 Base - 2017 Sport Hybrid SH-AWD - 2016 Sport Hybrid SH-AWD - 2016 Base - 2015 Base - 2014 Sport Hybrid SH-AWD - 2014 Base

    RDX

      2018 Base - 2017 Base - 2016 Base - 2015 Base - 2014 Base - 2013 Base - 2012 Base - 2012 SH-AWD
*we take fitment seriously and have invested heavily into matching products to your vehicle, but it is up to the end user to confirm products are suitable for their vehicle, legal for them to use for the purposes they intend, and verify fitment upon installation. Many opened products may not be returned, so if fitment is in question, please contact us before ordering. We are not resonsible for any costs incurring from a product not being suitable to an end users application.