There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

Low dust EBC Redstuff is a superb pad for fast street use and targets high HP imports, muscle cars and prestige European cars. EBC Redstuff ceramic pads reduce dust emitted by OEM pads by approx 80 percent.

Rear Redstuff 3000 series Red Ceramic Pads are for the fastest street use or Premium sedan fitment. Both Red Ceramic and 7000 SUV pads are our lowest dust ranges

EBC 10+ BMW 535i 3.0 Twin Turbo GT (F07) Redstuff Rear Brake Pads

Redstuff Premium Street REAR Disc Brake Pad Set FMSI D919

2011 thru 2016 BMW 535 xDrive 3.0 Twin Turbo GT (F07)

2010 and up BMW 550 xDrive 4.4 Twin Turbo GT (F07)

2010 and up BMW 750 4.4 Twin Turbo hybrid (F04)

2010 thru 2016 BMW 535i 3.0 Twin Turbo GT (F07)

2010 and up BMW 750 xDrive 4.4 Twin Turbo (F01)

2010 thru 2016 BMW 550 4.4 Twin Turbo GT (F07)

2010 thru 2015 BMW 740i 3.0 Twin Turbo (F02)

2010 thru 2015 BMW 740i 3.0 Twin Turbo (F01)

EBC Redstuff Ceramic Low Dust Brake Pads;

2010 and up BMW 760 6.0 Twin Turbo (F01)

2010 and up BMW 760 6.0 Twin Turbo (F02)

2010 and up BMW ActiveHybrid 7 4.4 Turbo

2009 and up BMW 750 4.4 Twin Turbo (F01)

2009 and up BMW 750 4.4 Twin Turbo (F02)

DP32020C REAR EBC Redstuff Pads

EBC REDSTUFF CERAMIC PADS

EBC REDSTUFF PADS (MM)

EBC Brakes Redstuff

Disc Brake Pad Set

EBC Redstuff Pads

Disc Brake Pad