Search
Filters
Close

EBC 08+ Ford Econoline E150 4-6 Yellowstuff Rear Brake Pads - ( EBC DP43005R )

Availability: 10 in stock
SKU: DP43005R
Manufacturer: EBC
Old price: $226.84
$215.50
Supported payment types:
VISA Accepted VISA Accepted VISA Accepted VISA Accepted VISA Accepted VISA Accepted Paypal Accepted AFFIRM Accepted

OR - Express Checkout

EBC Yellowstuff is an aramid fibre based brake compound with high brake effect form cold and is possibly one of the first ever compounds that can be used for STREET AND TRACK DRIVING. These pads do not require warm up but do get even stronger under the heat of hard driving. These are not a low dust pad and if your desire is for a low dust premium street use pad, you should consider EBC Redstuff.When considering full race use, Yellowstuff has been a strong favourite, having been used for two years in the Swedish Camaro Cup and at numerous other race events where a stock caliper system is fitted.It is also the choice of 90-percent of the Mazda MX5 Miata competitors in the UK race series and has an unblemished record as rotor friendly track pad for vehicles up to 2000 lbs weight or 200 BHP.In the USA the SCCA and NASA drivershave been testing Yellowstuff with feedback and good reports POURING in from a 543 test driver major market proving event with these groups. Read that figure again 543 test drivers.There is no guesswork here.

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

Yellowstuff Pad for Sedans or maxi brake compound for Truck and SUV Yellow pads are our highest friction range. These come in two compounds, one for Truck and SUV upgrade and one for Race and street fastest use on Sedans and Muscle cars

EBC Brakes Yellowstuff pads are high friction coefficient spirited street pads, track capable on import, European sport, and fast imports. For trucks and SUV vehicles Yellowstuff pads are great for towing/hauling as well as off-road use.

Yellowstuff Our Flagship range REAR Disc Brake Pad Set FMSI D1329

EBC 08+ Ford Econoline E150 4.6 Yellowstuff Rear Brake Pads

2008 thru 2010 FORD Econoline E350 6.0 TD SRW

2008 thru 2010 FORD Econoline E350 6.0 TD DRW

2008 thru 2014 FORD Econoline E350 6.8 DRW

2008 thru 2014 FORD Econoline E350 6.8 SRW

2008 thru 2014 FORD Econoline E350 5.4 DRW

2008 thru 2014 FORD Econoline E350 5.4 SRW

Yellowstuff Street And Track Brake Pads;

2008 thru 2014 FORD Econoline E150 4.6

2008 thru 2014 FORD Econoline E150 5.4

2008 thru 2014 FORD Econoline E250 4.6

2008 thru 2014 FORD Econoline E250 5.4

DP43005R REAR EBC Yellowstuff Pads

EBC YELLOWSTUFF PADS

EBC Brakes Yellowstu

Disc Brake Pad Set

Disc Brake Pad

EBC Yellowstuff is an aramid fibre based brake compound with high brake effect form cold and is possibly one of the first ever compounds that can be used for STREET AND TRACK DRIVING. These pads do not require warm up but do get even stronger under the heat of hard driving. These are not a low dust pad and if your desire is for a low dust premium street use pad, you should consider EBC Redstuff.When considering full race use, Yellowstuff has been a strong favourite, having been used for two years in the Swedish Camaro Cup and at numerous other race events where a stock caliper system is fitted.It is also the choice of 90-percent of the Mazda MX5 Miata competitors in the UK race series and has an unblemished record as rotor friendly track pad for vehicles up to 2000 lbs weight or 200 BHP.In the USA the SCCA and NASA drivershave been testing Yellowstuff with feedback and good reports POURING in from a 543 test driver major market proving event with these groups. Read that figure again 543 test drivers.There is no guesswork here.

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

Yellowstuff Pad for Sedans or maxi brake compound for Truck and SUV Yellow pads are our highest friction range. These come in two compounds, one for Truck and SUV upgrade and one for Race and street fastest use on Sedans and Muscle cars

EBC Brakes Yellowstuff pads are high friction coefficient spirited street pads, track capable on import, European sport, and fast imports. For trucks and SUV vehicles Yellowstuff pads are great for towing/hauling as well as off-road use.

Yellowstuff Our Flagship range REAR Disc Brake Pad Set FMSI D1329

EBC 08+ Ford Econoline E150 4.6 Yellowstuff Rear Brake Pads

2008 thru 2010 FORD Econoline E350 6.0 TD SRW

2008 thru 2010 FORD Econoline E350 6.0 TD DRW

2008 thru 2014 FORD Econoline E350 6.8 DRW

2008 thru 2014 FORD Econoline E350 6.8 SRW

2008 thru 2014 FORD Econoline E350 5.4 DRW

2008 thru 2014 FORD Econoline E350 5.4 SRW

Yellowstuff Street And Track Brake Pads;

2008 thru 2014 FORD Econoline E150 4.6

2008 thru 2014 FORD Econoline E150 5.4

2008 thru 2014 FORD Econoline E250 4.6

2008 thru 2014 FORD Econoline E250 5.4

DP43005R REAR EBC Yellowstuff Pads

EBC YELLOWSTUFF PADS

EBC Brakes Yellowstu

Disc Brake Pad Set

Disc Brake Pad

Write your own review
*
*
  • Bad
  • Excellent
*
*
*
*

Vehicle Fitment

Ford

    E-350 Super Duty

      2018 Base - 2017 Base - 2016 Base - 2015 Base - 2014 Base - 2014 XL - 2014 XLT - 2013 Base - 2013 XL - 2013 XLT - 2012 Base - 2012 XL - 2012 XLT - 2011 Base - 2011 XL - 2011 XLT - 2010 Base - 2010 XL - 2010 XLT - 2009 Base - 2009 XL - 2009 XLT - 2008 XLT - 2008 XL - 2008 Base

    E-150

      2014 Base - 2014 XL - 2014 XLT - 2013 Base - 2013 XL - 2013 XLT - 2012 Base - 2012 XL - 2012 XLT - 2011 Base - 2011 XL - 2011 XLT - 2010 Base - 2010 XL - 2010 XLT - 2009 Base - 2009 XL - 2009 XLT - 2008 XLT - 2008 XL - 2008 Base

    E-250

      2014 Base - 2013 Base - 2012 Base - 2011 Base - 2010 Base - 2009 Base - 2008 Base
*we take fitment seriously and have invested heavily into matching products to your vehicle, but it is up to the end user to confirm products are suitable for their vehicle, legal for them to use for the purposes they intend, and verify fitment upon installation. Many opened products may not be returned, so if fitment is in question, please contact us before ordering. We are not resonsible for any costs incurring from a product not being suitable to an end users application.