Search
Filters
Close

EBC 07-09 Ford Expedition 5-4 2WD Yellowstuff Rear Brake Pads - ( EBC DP41804R )

Availability: 5 in stock
SKU: DP41804R
Manufacturer: EBC
Old price: $179.39
$170.42
Supported payment types:
VISA Accepted VISA Accepted VISA Accepted VISA Accepted VISA Accepted VISA Accepted Paypal Accepted AFFIRM Accepted

OR - Express Checkout

EBC Yellowstuff is an aramid fibre based brake compound with high brake effect form cold and is possibly one of the first ever compounds that can be used for STREET AND TRACK DRIVING. These pads do not require warm up but do get even stronger under the heat of hard driving. These are not a low dust pad and if your desire is for a low dust premium street use pad, you should consider EBC Redstuff.When considering full race use, Yellowstuff has been a strong favourite, having been used for two years in the Swedish Camaro Cup and at numerous other race events where a stock caliper system is fitted.It is also the choice of 90-percent of the Mazda MX5 Miata competitors in the UK race series and has an unblemished record as rotor friendly track pad for vehicles up to 2000 lbs weight or 200 BHP.In the USA the SCCA and NASA drivershave been testing Yellowstuff with feedback and good reports POURING in from a 543 test driver major market proving event with these groups. Read that figure again 543 test drivers.There is no guesswork here.

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

Yellowstuff Pad for Sedans or maxi brake compound for Truck and SUV Yellow pads are our highest friction range. These come in two compounds, one for Truck and SUV upgrade and one for Race and street fastest use on Sedans and Muscle cars

EBC Brakes Yellowstuff pads are high friction coefficient spirited street pads, track capable on import, European sport, and fast imports. For trucks and SUV vehicles Yellowstuff pads are great for towing/hauling as well as off-road use.

Yellowstuff Our Flagship range REAR Disc Brake Pad Set FMSI D1279

EBC 07-09 Ford Expedition 5.4 2WD Yellowstuff Rear Brake Pads

2013 and up LINCOLN MKT 3.5 Twin Turbo (Performance Brakes)

2015 thru 2017 LINCOLN Navigator 3.5 Twin Turbo 2WD

2015 thru 2017 LINCOLN Navigator 3.5 Twin Turbo 4WD

2015 thru 2017 FORD Expedition 3.5 Twin Turbo 2WD

2015 thru 2017 FORD Expedition 3.5 Twin Turbo 4WD

2013 and up LINCOLN MKT 3.7 (Performance Brakes)

2010 thru 2014 LINCOLN Navigator 5.4 2WD

2010 thru 2014 LINCOLN Navigator 5.4 4WD

Yellowstuff Street And Track Brake Pads;

2007 thru 2009 LINCOLN Navigator 5.4 4WD

2007 thru 2009 LINCOLN Navigator 5.4 2WD

2007 thru 2009 FORD Expedition 5.4 2WD

2007 thru 2009 FORD Expedition 5.4 4WD

2010 thru 2014 FORD Expedition 5.4 2WD

2010 thru 2014 FORD Expedition 5.4 4WD

DP41804R REAR EBC Yellowstuff Pads

EBC YELLOWSTUFF PADS

EBC Brakes Yellowstu

Disc Brake Pad Set

Disc Brake Pad

EBC Yellowstuff is an aramid fibre based brake compound with high brake effect form cold and is possibly one of the first ever compounds that can be used for STREET AND TRACK DRIVING. These pads do not require warm up but do get even stronger under the heat of hard driving. These are not a low dust pad and if your desire is for a low dust premium street use pad, you should consider EBC Redstuff.When considering full race use, Yellowstuff has been a strong favourite, having been used for two years in the Swedish Camaro Cup and at numerous other race events where a stock caliper system is fitted.It is also the choice of 90-percent of the Mazda MX5 Miata competitors in the UK race series and has an unblemished record as rotor friendly track pad for vehicles up to 2000 lbs weight or 200 BHP.In the USA the SCCA and NASA drivershave been testing Yellowstuff with feedback and good reports POURING in from a 543 test driver major market proving event with these groups. Read that figure again 543 test drivers.There is no guesswork here.

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

Yellowstuff Pad for Sedans or maxi brake compound for Truck and SUV Yellow pads are our highest friction range. These come in two compounds, one for Truck and SUV upgrade and one for Race and street fastest use on Sedans and Muscle cars

EBC Brakes Yellowstuff pads are high friction coefficient spirited street pads, track capable on import, European sport, and fast imports. For trucks and SUV vehicles Yellowstuff pads are great for towing/hauling as well as off-road use.

Yellowstuff Our Flagship range REAR Disc Brake Pad Set FMSI D1279

EBC 07-09 Ford Expedition 5.4 2WD Yellowstuff Rear Brake Pads

2013 and up LINCOLN MKT 3.5 Twin Turbo (Performance Brakes)

2015 thru 2017 LINCOLN Navigator 3.5 Twin Turbo 2WD

2015 thru 2017 LINCOLN Navigator 3.5 Twin Turbo 4WD

2015 thru 2017 FORD Expedition 3.5 Twin Turbo 2WD

2015 thru 2017 FORD Expedition 3.5 Twin Turbo 4WD

2013 and up LINCOLN MKT 3.7 (Performance Brakes)

2010 thru 2014 LINCOLN Navigator 5.4 2WD

2010 thru 2014 LINCOLN Navigator 5.4 4WD

Yellowstuff Street And Track Brake Pads;

2007 thru 2009 LINCOLN Navigator 5.4 4WD

2007 thru 2009 LINCOLN Navigator 5.4 2WD

2007 thru 2009 FORD Expedition 5.4 2WD

2007 thru 2009 FORD Expedition 5.4 4WD

2010 thru 2014 FORD Expedition 5.4 2WD

2010 thru 2014 FORD Expedition 5.4 4WD

DP41804R REAR EBC Yellowstuff Pads

EBC YELLOWSTUFF PADS

EBC Brakes Yellowstu

Disc Brake Pad Set

Disc Brake Pad

Write your own review
*
*
  • Bad
  • Excellent
*
*
*
*

Vehicle Fitment

Lincoln

    MKT

      2019 Reserve - 2019 Base - 2019 Livery - 2018 Reserve - 2018 Premiere - 2017 Base - 2016 Base - 2016 EcoBoost - 2015 EcoBoost - 2015 Base - 2014 EcoBoost - 2014 Base - 2013 Base - 2013 EcoBoost

    Navigator

      2017 L Reserve - 2017 L Select - 2017 Reserve - 2017 Select - 2016 Select - 2016 Reserve - 2016 L Reserve - 2016 L Select - 2015 Base - 2015 L - 2014 Base - 2014 L - 2013 Base - 2013 L - 2012 Base - 2012 L - 2011 Base - 2011 L - 2010 Base - 2010 L - 2009 Base - 2009 L - 2008 Base - 2008 L - 2007 Luxury - 2007 Ultimate - 2007 L Ultimate - 2007 L Luxury

Ford

    Expedition

      2017 SSV - 2017 EL King Ranch - 2017 EL Limited - 2017 EL Platinum - 2017 EL XL - 2017 EL XLT - 2017 King Ranch - 2017 Limited - 2017 Platinum - 2017 XL - 2017 XLT - 2017 EL SSV - 2016 EL King Ranch - 2016 EL Limited - 2016 EL Platinum - 2016 EL XLT - 2016 King Ranch - 2016 Limited - 2016 Platinum - 2016 XLT - 2016 EL XL - 2016 XL - 2016 SSV - 2016 EL SSV - 2015 XL - 2015 EL XL - 2015 EL King Ranch - 2015 EL Limited - 2015 EL Platinum - 2015 EL XLT - 2015 King Ranch - 2015 Limited - 2015 Platinum - 2015 XLT - 2014 XL - 2014 XLT - 2014 Limited - 2014 King Ranch - 2014 EL King Ranch - 2014 EL Limited - 2014 EL XL - 2014 EL XLT - 2013 EL King Ranch - 2013 EL Limited - 2013 EL XL - 2013 EL XLT - 2013 King Ranch - 2013 XL - 2013 Limited - 2013 XLT - 2012 EL King Ranch - 2012 EL Limited - 2012 EL XL - 2012 EL XLT - 2012 King Ranch - 2012 Limited - 2012 XL - 2012 XLT - 2011 XL - 2011 EL XL - 2011 EL King Ranch - 2011 EL Limited - 2011 EL XLT - 2011 King Ranch - 2011 Limited - 2011 XLT - 2010 Eddie Bauer - 2010 King Ranch - 2010 Limited - 2010 XLT - 2010 EL Eddie Bauer - 2010 EL King Ranch - 2010 EL Limited - 2010 EL XLT - 2009 Eddie Bauer - 2009 King Ranch - 2009 Limited - 2009 XLT - 2009 EL Eddie Bauer - 2009 EL King Ranch - 2009 EL Limited - 2009 EL XLT - 2008 EL XLT - 2008 EL Limited - 2008 EL Eddie Bauer - 2008 XLT - 2008 Limited - 2008 Eddie Bauer - 2008 Funkmaster Flex Edition - 2008 King Ranch - 2008 EL King Ranch - 2007 Eddie Bauer - 2007 Limited - 2007 XLT - 2007 EL Eddie Bauer - 2007 EL Limited - 2007 EL XLT
*we take fitment seriously and have invested heavily into matching products to your vehicle, but it is up to the end user to confirm products are suitable for their vehicle, legal for them to use for the purposes they intend, and verify fitment upon installation. Many opened products may not be returned, so if fitment is in question, please contact us before ordering. We are not resonsible for any costs incurring from a product not being suitable to an end users application.