Search
Filters
Close

EBC 06-08 Ford Edge 3-5 2WD Extra Duty Rear Brake Pads - ( EBC ED91795 )

Availability: Special Order*
SKU: ED91795
Manufacturer: EBC
Old price: $134.12
$127.41
Supported payment types:
VISA Accepted VISA Accepted VISA Accepted VISA Accepted VISA Accepted VISA Accepted Paypal Accepted AFFIRM Accepted

OR - Express Checkout

The UK EFI Bristol factory of EBC Brakes has used new ECO friendly technology to develop a brake pad that has unusually high friction levels yet still has good manners for street use with brake effect being strong from cold when the brake is first applied. The race pedigree of the material used also guarantees effective stopping up to temperatures exceeding 1400 F well above the maximum experienced in heavy braking, towing or downhill descents. Winter testing in Ohio on a fleet five popular light trucks showed us the proof on cold braking in the worst wet and cold conditions where many performance brakes would not even start to show good brake effect. So these are pads that have an extremely wide range of usability. The new carbon granule based Extra Duty material is also rotor friendly, minimal in dust and noiseless and each set is supplied with revolutionary NUCAP piston insert shims, another first from EBC

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

This EBC high performance truck, Jeep and SUV pad features new ECO technology to develop a brake pad that with high friction levels yet still durable for street use with brake effect being strong from cold when the brake is first applied.

EBC 06-08 Ford Edge 3.5 2WD Extra Duty Rear Brake Pads

Orangestuff REAR Disc Brake Pad Set FMSI D1259

EBC Truck/Jeep And SUV Extra Duty Brake Pads;

Truck-Jeep-SUV Extra Duty and Orangestuff

2006 thru 2012 MAZDA CX-7 2.3 Turbo

2006 thru 2008 LINCOLN MKX 3.5 2WD

2009 thru 2010 LINCOLN MKX 3.5 2WD

2006 thru 2008 LINCOLN MKX 3.5 4WD

2009 thru 2010 LINCOLN MKX 3.5 4WD

2009 thru 2010 FORD Edge 3.5 2WD

2009 thru 2010 FORD Edge 3.5 4WD

ED91795 REAR EBC Extra Duty Pads

2006 thru 2008 FORD Edge 3.5 4WD

2006 thru 2008 FORD Edge 3.5 2WD

2010 thru 2012 MAZDA CX-7 2.5

2007 thru 2008 MAZDA CX-9 3.5

2008 thru 2016 MAZDA CX-9 3.7

EBC EXTRA DUTY TRUCK PADS

Extra Duty Truck/SUV Pad

EBC Brakes Extra Dut

EBC Extra Duty Pads

Disc Brake Pad Set

Disc Brake Pad

The UK EFI Bristol factory of EBC Brakes has used new ECO friendly technology to develop a brake pad that has unusually high friction levels yet still has good manners for street use with brake effect being strong from cold when the brake is first applied. The race pedigree of the material used also guarantees effective stopping up to temperatures exceeding 1400 F well above the maximum experienced in heavy braking, towing or downhill descents. Winter testing in Ohio on a fleet five popular light trucks showed us the proof on cold braking in the worst wet and cold conditions where many performance brakes would not even start to show good brake effect. So these are pads that have an extremely wide range of usability. The new carbon granule based Extra Duty material is also rotor friendly, minimal in dust and noiseless and each set is supplied with revolutionary NUCAP piston insert shims, another first from EBC

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

This EBC high performance truck, Jeep and SUV pad features new ECO technology to develop a brake pad that with high friction levels yet still durable for street use with brake effect being strong from cold when the brake is first applied.

EBC 06-08 Ford Edge 3.5 2WD Extra Duty Rear Brake Pads

Orangestuff REAR Disc Brake Pad Set FMSI D1259

EBC Truck/Jeep And SUV Extra Duty Brake Pads;

Truck-Jeep-SUV Extra Duty and Orangestuff

2006 thru 2012 MAZDA CX-7 2.3 Turbo

2006 thru 2008 LINCOLN MKX 3.5 2WD

2009 thru 2010 LINCOLN MKX 3.5 2WD

2006 thru 2008 LINCOLN MKX 3.5 4WD

2009 thru 2010 LINCOLN MKX 3.5 4WD

2009 thru 2010 FORD Edge 3.5 2WD

2009 thru 2010 FORD Edge 3.5 4WD

ED91795 REAR EBC Extra Duty Pads

2006 thru 2008 FORD Edge 3.5 4WD

2006 thru 2008 FORD Edge 3.5 2WD

2010 thru 2012 MAZDA CX-7 2.5

2007 thru 2008 MAZDA CX-9 3.5

2008 thru 2016 MAZDA CX-9 3.7

EBC EXTRA DUTY TRUCK PADS

Extra Duty Truck/SUV Pad

EBC Brakes Extra Dut

EBC Extra Duty Pads

Disc Brake Pad Set

Disc Brake Pad

Write your own review
*
*
  • Bad
  • Excellent
*
*
*
*

Vehicle Fitment

Mazda

    CX-9

      2016 Grand Touring - 2016 Sport - 2016 Touring - 2016 Signature - 2015 Grand Touring - 2015 Sport - 2015 Touring - 2014 Grand Touring - 2014 Sport - 2014 Touring - 2013 Grand Touring - 2013 Touring - 2013 Sport - 2012 Grand Touring - 2012 Sport - 2012 Touring - 2011 Grand Touring - 2011 Sport - 2011 Touring - 2010 Grand Touring - 2010 Sport - 2010 Touring - 2009 Touring - 2009 Sport - 2009 Grand Touring - 2008 Touring - 2008 Sport - 2008 Grand Touring - 2007 Grand Touring - 2007 Sport - 2007 Touring

    CX-7

      2012 Grand Touring - 2012 SV - 2012 Sport - 2012 Touring - 2011 Grand Touring - 2011 Sport - 2011 SV - 2011 Touring - 2010 Grand Touring - 2010 Sport - 2010 Touring - 2010 SV - 2009 Grand Touring - 2009 Touring - 2009 Sport - 2008 Grand Touring - 2008 Touring - 2008 Sport - 2007 Sport - 2007 Touring - 2007 Grand Touring

Ford

    Edge

      2010 Limited - 2010 SE - 2010 SEL - 2010 Sport - 2009 Limited - 2009 SE - 2009 SEL - 2009 Sport - 2008 SEL - 2008 SE - 2008 Limited - 2007 SE - 2007 SEL - 2007 SEL Plus

Lincoln

    MKX

      2010 Base - 2009 Base - 2008 Base - 2007 Base
*we take fitment seriously and have invested heavily into matching products to your vehicle, but it is up to the end user to confirm products are suitable for their vehicle, legal for them to use for the purposes they intend, and verify fitment upon installation. Many opened products may not be returned, so if fitment is in question, please contact us before ordering. We are not resonsible for any costs incurring from a product not being suitable to an end users application.